Panasonic PT-LW80NTE Operating Instructions Manual Download

Page: 23 / 58

Basic O

eration

Switching the projector on/off

NGLISH - 23

The

POWER

indicator informs you the status of the

power and the

POWER LOCK

indicator shows the

status of the

RELEASE

button.

When the

LAMP

and/or

TEMP

indicators are flashing,

the

POWER

and

POWER LOCK

indicators will not light.

POWER LOCK indicator status

POWER indicator status

POWER and POWER LOCK indicators

POWER

indicator

POWER LOCK

indicator

Indicator status

Status

No illumination or flashing

No power is supplied.

The

RELEASE

button is pressed and the

POWER

button is unlocked.

The power is on.

Red

Lit

The

POWER

button is locked.

Flashing

Pressing the locked

POWER

button.

Indicator status

Status

No illumination or flashing

No power is supplied and the internal cooling fan is not operating.

Red

Lit

The power is supplied and in standby mode

, and the

POWER

button is locked.

*1. The electric consumption in standby mode is 4.0 W.

Flashing

Network connection standby: Only when

NETWORK STANDBY

NETWORK

menu is

Green

Flashing

The power is on and preparing for projection.

Lit

Projecting.

Orange

Lit

No power supply and the internal fan is cooling the lamp by internal power supply.

Flashing

The power is switched on again while cooling the lamp and recovering to the
projection mode. Recovery may take a while.

Summary of Contents for PT-LW80NTE


























































Search results

Summary of Contents for PT-LW80NTE

Reviews:

Related manuals for PT-LW80NTE

Brands by name

Popular brands

Panasonic PT-LW80NTE, Operating Instructions Manual

Search results

Summary of Contents for PT-LW80NTE

Reviews:

Related manuals for PT-LW80NTE

Brands by name

Popular brands