Panasonic PT-LW375, Operating Instructions Manual

Page: 67 / 119

ENGLISH - 67
[Keystone]
Sets whether or not to keep the keystone correction even after the projector is turned off or
the power cord is disconnected.
[V Keystone]
*1
Adjusts when the vertical trapezoid of the projected image is distorted.
[H/V Keystone]
*2
Adjusts when the horizontal or vertical trapezoid of the projected image is distorted.
[Corner correction]
*2
Adjusts when the four corners of the projected image are distorted.
[Curved correction]
*2
Adjusts when the linearity is not uniform or the vertical and horizontal lines are distorted.
[Reset value]
*2
Returns the corrected values to the factory default values.
*1 Only for PT-LB305.
*2 Only for PT-LW375, PT-LW335, PT-LB425, PT-LB385 and PT-LB355.
[Keystone]
Set whether or not to keep the keystone correction even after the projector is turned off or the power cord is disconnected.
1) Press
as
to select [Keystone].
2) Press the <ENTER> button.
f
The [Keystone] screen is displayed.
3) Press
as
to select [Keystone].
4) Press the <ENTER> button.
5) Press
as
to switch the item.
f
The items will switch each time you press the button.
[Reset]
If the [Setting] menu → [Standby mode] is set to [Eco], the keystone correction will be canceled
when you disconnect the power cord or turn off the projector.
If the [Setting] menu → [Standby mode] is set to [Normal], the keystone correction will be canceled
when you disconnect the power cord; the keystone correction will be kept when you turn off the
projector.
[Store] The keystone correction will be kept when you plug out the power cord or turn off the projector.
[V Keystone]
(Only for PT-LB305)
1) Press
as
to select [Keystone].
2) Press the <ENTER> button.
f
The [Keystone] screen is displayed.
3) Press
as
to select [V Keystone].
4) Press the <ENTER> button.
5) Press
as
to correct the keystone.
Operation Adjustment
Press the
a
button. The top becomes smaller.
Press the
s
button.
The bottom becomes smaller.
[H/V Keystone]
(Only for PT-LW375, PT-LW335, PT-LB425, PT-LB385 and PT-LB355)
1) Press
as
to select [Keystone].
2) Press the <ENTER> button.
f
The [Keystone] screen is displayed.
3) Press
as
to select [H/V Keystone].
4) Press the <ENTER> button.
f
The [H/V Keystone] individual adjustment screen is displayed.
Chapter 4 Settings - [Expand] menu