Panasonic PT-LC56E, Operating Instructions Manual

Page: 12 / 32

E
NGLISH
-23
Basic
O
peration
22-E
NGLISH
Turning on the power
Before turning on the power
1, Ensure that all components
are connected properly.
2, Connect the accessory mains lead.
3, Remove the lens cover.
#
ENTER
FREEZE SHUTTER
INDEX
WINDOW
PROJECTOR
VOLUME D.ZOOM
STD
VIDEO
INPUT
POWER
RGB
MENU
AUTO
SETUP
)
*
$
&
(
'
Power indicator
Mains lead
Lens cover
Press the MAIN POWER switch to turn on the
power.
B
The power indicator on the projector will illuminate red.
Press the POWER button.
B
The power indicator on the projector will flash green. After a short
period, the indicator will illuminate green, and a picture will be
projected.
Turn on the power of all connected devices.
B Start the Play function of a device such as a DVD player.
NOTE:
B A tinkling sound may be heard while the power indicator is turned off,
but this is not a sign of a malfunction.
Press the input select button to select the
input signal.
B
A picture will be projected in accordance with the selected input signal.
Follow the procedure below when you set the projector up first, and when
you change the setup place.
Press the AUTO SETUP button to initiate
automatic positioning.
B The tilt of the projector and the input
signal will be detected and keystone
distortion and the position of the
image will be corrected.
(Refer to page 26 for details.)
Adjusting the size
B Turn the zoom ring to adjust the size of the projected image.
Adjusting the focus
B Turn the focus ring to adjust the focus of the projected image.
AUTO SETUP
Input select
buttons
Changing
signals
VIDEO RGB
RGB1 RGB2
VIDEO S-VIDEO
VIDEO
S-VIDEO
RGB1
RGB2
&
'
)
*
(
#
$
%
Adjusting the angle
B
While pressing the adjuster
buttons, adjust the forward/back
angle of tilt of the projector.Adjust
so that the projector is as vertical to
the screen as possible.