background image

E

NGLISH - 24

B

asi
c Op

eration

Projecting an image

1. Switch on the connected devices.

 

Press the play button of the required device.

2. Press the 

INPUT SELECT

 buttons to select the required input method if needed. See “Switching the input 

signal” on page 26.

 

The image will be projected on the screen.

Follow the procedure below when you set the projector up first, and when you change the placement after original 
setup.

1. Adjusting the angle.

 

Place the projector so that it is vertical to the screen.

 

While pressing the 

Front leg adjuster

 button, adjust the forward/back angle of tilt of the projector. Adjust so that the 

projected image is placed at the centre of the screen.

 

See “Front adjustable legs and throwing angle” on page 17.

2. Press the AUTO SETUP button (when RGB signals are being input).

 

Settings such as the position of the image will be corrected automatically. See “Setting up the image position 
automatically” on page 25.

3. Adjusting the size.

 

Turn the 

Zoom ring

 to adjust the size of the projected image.

4. Adjusting the focus.

 

Turn the 

Focus ring

 to adjust the focus of the projected image.

Selecting the input signal

NOTE:

SIGNAL SEARCH

 is 

ON

 as default and the signal from the connected devices is detected automatically. See “SIGNAL 

SEARCH” on page 37.

• If no signal is detected, the guide screen for computer connection will be displayed (when “INPUT GUIDE” in the 

“OPTION” menu is set to “DETAILED”. See “INPUT GUIDE” on page 36.)

• Press the 

INPUT SELECT

 button to finish the input signal search.

Positioning the image

NOTE:

• Heated air comes out of the 

Air exhaust port

. Be careful of this when adjusting the 

Font adjustable legs

.

• If keystone distortion occurs, see “KEYSTONE” on page 34.
• If you adjust the focus, you may need to adjust the size of the image by moving the 

Zoom ring

 again.

Screen

Zoom ring

Focus ring

Summary of Contents for PT-LB51A

























































Reviews: