24-E
NGLISH
Connections
Notes on connections
B
Read the instruction manual for each system component carefully before
connecting it.
B
Turn off the power supply for all components before making any
connections.
B
If the cables necessary for connecting a component to the system are not
included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
B
If there is a lot of jitter in the video signal which is input from the video
source, the picture on the screen may flicker. In such cases, it will be
necessary to connect a TBC (time base corrector).
B
The projector has built-in speakers. However, you will need to connect a
separate audio system to the AUDIO OUT jack if your needs specify high
sound volumes. No sound will come out of the projector’s built-in speakers
while the AUDIO OUT jack is being used.
B
It may not be possible to connect some types of computer. Refer to the list
of compatible signals on page
63
.
B
The pin layout and signal names for the S-VIDEO IN connector are shown
below.
Pin No.
Signal
#
Earth (Luminance signal)
Earth (Colour signal)
Luminance signal
Colour signal
$
%
&
B
The pin layout and signal names for the RGB/YP
B
P
R
(RGB1 IN/RGB2 IN)
connector are shown below.
Pin No.
Signal
#
R/P
R
G/G·SYNC/Y
B/P
B
SDA
$
%
.
/
HD/SYNC
0
VD
1
SCL
Pin
+
is spare.
Pins
&
–
*
,
,
and
-
are for earth.
Pins
.
and
1
functions are only valid when
supported by the computer
#
$
%
&
External view
-
1
#
'
,
(
External view