30
Adjusting the picture
1. Obtain the MENU window and select
(highlight) the desired option item with
the
or
buttons.
2. Adjust the parameter value with the
or
buttons. For items requiring a separate
bar graph, first display the bar graph with
the “ENTER” or
/
buttons, then
adjust the parameter value with the
or
buttons.
• For RGB/YP
B
P
R
/DVI signals
• For composite or S-video signals
COLOR
(Valid for composite/S-video/YP
B
P
R
signals only)
button: Deepens colors.
button: Weakens colors.
TINT
(Valid for NTSC / NTSC4.43 standard)
“TINT” is used to adjust human skin.
button: Adjusts skin tone toward greenish color.
button: Adjusts skin tone toward reddish-purple.
PICTURE MODE
The picture mode can be selected from the following
depending on viewing conditions and the video signal
source in use:
NATURAL: Picture brightness/contrast ratio is
adjusted to that suitable for projection
image viewing under typical location
conditions.
DYNAMIC: Picture brightness/contrast ratio is
increased to suit brighter viewing
environments.
PICTURE
PICTURE MODE
NATURAL
SELECT
ADJ
ESC
BRIGHT
COLOR
32
CONTRAST
32
SHARPNESS
0
0
W-BAL R
32
32
W-BAL G
32
W-BAL B
SIGNAL MODE
STANDARD
32
XGA
ADJ
PICTURE
PICTURE MODE
COLOR
NATURAL
32
SELECT
ESC
TINT
32
BRIGHT
32
CONTRAST
32
SHARPNESS
0
8
TV-SYSTEM
STANDARD
AUTO1
PICTURE MODE
NATURAL
DYNAMIC
Note
• PT-L6600U is able to adjust the tint level at
YP
B
P
R
input mode.
BRIGHT
“BRIGHT” is used to adjust the black level
(brightness).
button: Raises the picture brightness.
button: Lowers the picture brightness.
CONTRAST
“CONTRAST” is used to adjust the contrast ratio.
button: Raises the contrast ratio.
button: Lowers the contrast ratio.
SHARPNESS
(Valid for composite/RGB/YP
B
P
R
signals only for PT-
L6510U)
(Valid for composite/YP
B
P
R
signals only for PT-
L6600U)
“SHARPNESS” is used to adjust the crispness of the
image.
button: Sharpens the edge of the image.
button: Softens the edge of the image.
