23
Connecting with Wireless LAN (continued)
Computer operation
Make the network setting according to your system administrator.
1
If the projector settings are the default settings (See page 14), then the computer can be used with the
following network settings.
IP ADDRESS
192.168.11.101
SUBNET MASK
255.255.255.0
DEFAULT GATEWAY
192.168.11.1
Click [Start]→[Connect To
2
w_
]→[Wireless Network Connection
w_
], select the wireless
network of [SSID] set with the projector, and then click [Connect
w_
].
If the projector setting is the factory setting, then [SSID] is [Panasonic Projector].
The names are for Windows XP. In Windows Vista/Windows 7, the procedure will be [Start]→[Connect To].
_
If you use any wireless utility other than Windows [Wireless Network Connection], follow its operation
•
procedure for connection.
If you use the access point, configure the projector and each network setting of the computer following
•
the instruction of the network administrator.
