13
NETWORK menu (continued)
AUTHENTICATION
w
q
: Set the user authentication method used by the network to be connected.
OPEN
:
Select when making a connection using [AD HOC], or when the access
point authentication method is OpenSystem
_
1
.
SHARED
:
Select when making a connection using [AD HOC], or when the access
point authentication method is Shared Key
_
1
.
WPA-PSK
_
2
:
Select when the access point authentication method is WPA-PSK
_
1
.
WPA2-PSK
_
2
:
Select when the access point authentication method is WPA2-PSK
_
1
.
WPA-EAP/
WPA2-EAP
_
2
: Select when the access point authentication method is WPA-EAP
_
1
/
WPA2-EAP
_
1
.
WPA-EAP
_
2
: Select when the access point authentication method is WPA-EAP
_
1
.
WPA2-EAP
_
2
: Select when the access point authentication method is WPA2-EAP
_
1
.
ENCRYPTION
w
q
: Select the encryption method to be used for communication between the
projector and the network.
NONE
: Select when transmit without encryption. It is selectable only when
[AUTHENTICATION] is [OPEN] or [SHARED].
WEP
_
1
:
Select when ENCRYPTION is WEP.
TKIP
_
1
:
Select when ENCRYPTION is TKIP.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],
[WPA-EAP], [WPA2-EAP].
AES
_
1
:
Select when ENCRYPTION is AES.
Selectable when [AUTHENTICATION] is either [WPA-PSK], [WPA2-PSK],
[WPA-EAP], [WPA2-EAP].
1: “Glossary” (
_
See page
44 – 45)
2: Available when the mode is set to [INFRASTRUCTURE].
_
Important video/audio data is protected because AES encryption pr ng takes place in advance for all
network numbers, even if [ENCRYPTION] is set to [NONE].
Press ▲▼◄► to select [NEXT], and press <ENTER> button.
4
At this point, select [RETURN] to go back to the previous screen (1/3), or select [CANCEL] to cancel the
configuration change.
In addition, further perform the following setting depending on [AUTHENTICATION] and [ENCRYPTION]
settings.
WIRELESS DETAILED SETUP
CANCEL
SELECT
OK
CANCEL
RETURN
KEY 1
KEY 2
KEY 3
KEY 4
DEFAULT KEY
USER1
3/3
1
