Panasonic PT-F300EA, Operating Instructions Manual

Page: 47 / 66

SECURITY menu
E
NGLISH - 47
Settings
You can lock the MENU button function and the
password will be asked to display the menu every time.
OFF Deactivate the MENU LOCK system.
ON Activate the MENU LOCK system.
You can change the password for MENU LOCK system
to your original.
1. Press the ENTER button.
2. Enter the original password.
Use
F G I H
to specify the location of the required
character, and press the ENTER button.
3. Repeat step 2 until you finish the text line.
You can enter up to 16 characters.
Move the cursor to ALL DELETE and press the
ENTER button to delete all the entered text line.
Press the DEFAULT button to delete the last entered
character or indicated with the cursor in the text line.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press
G
then perform step 2.
4. Select OK and press the ENTER button to set the
password.
J
CONTROL PANEL
You can disable the control panel buttons on the
projector body. Press
I
or
H
to switch the option.
ENABLE Enable the control panel buttons.
DISABLE Disable the control panel buttons.
The confirmation screen will be
displayed. Select
OK by pressing the
I
, and the ENTER button.
J
REMOTE CONTROLLER
You can disable the remote control buttons. Press
I
or
H
to switch the option.
ENABLE Enable the remote control buttons.
DISABLE Disable the remote control buttons.
The confirmation screen will be
displayed. Select
OK by pressing the
I
, and the ENTER button.
MENU LOCK
NOTE:
• The factory default password is “AAAA”.
• The factory default password is valid until you change
the password in MENU LOCK PASSWORD menu.
• When the projector is initialised, the password will be
changed to the factory default setting, "AAAA".
MENU LOCK PASSWORD
NOTE:
• If you need to restore the factory default password,
contact to an Authorised Service Centre.
OK CANCEL
ALL DELETE
MENU LOCK PASSWORD
SPACE
CONTROL DEVICE SETUP
NOTE:
• If you disable both of the control panel and remote
control buttons, you cannot return to the standby mode.
Use this function with utmost care.
• If you press a disabled button, you will be asked to
perform the security password operation. The
password screen will disappear after 10 seconds
without any operation.
NOTE:
• You can enable the disabled control panel buttons by
performing the control panel button operation. While
pressing the
ENTER button, press the MENU button for
2 seconds.