Chapter 4
Settings — [SIGNAL LIST] menu
ENGLISH - 133
Sub memory
The projector has a sub memory function that can register the multiple image adjustment data, even if it is
recognized as the same signal by the frequency or format of the synchronization signal source.
Use this function when you need to adjust the picture quality such as switching of the aspect ratio or white
balance by the same synchronization signal source. The sub memory includes all the data that can be adjusted
for each signal, such as the image aspect ratio and data adjusted in the [PICTURE] item ([CONTRAST],
[BRIGHTNESS], etc.).
Registering to the sub memory
1) Press
qw
on the normal screen (when the menu is not displayed).
f
The sub memory registration screen is displayed if the sub memory is not registered. Proceed to Step
3)
.
f
A list of sub memories registered to the signal currently input is displayed.
f
By selecting [SUB MEMORY] from the [PROJECTOR SETUP] menu
→
[FUNCTION BUTTON], the
<FUNCTION> button on the remote control can be used instead of
qw
.
2) Press
asqw
to select the sub memory number to register in [SUB MEMORY LIST].
3) Press the <ENTER> button.
f
The
[SIGNAL NAME CHANGE]
screen is displayed.
4) Press
asqw
to select [OK], and press the <ENTER> button.
f
To rename the registered signal, follow the procedure in Steps
6)
and
7)
in “Renaming the registered signal”
(
x
page 131).
Switching to the sub memory
1) Press
qw
on the normal screen (when the menu is not displayed).
f
A list of sub memories registered to the signal currently input is displayed.
2) Press
asqw
to select the signal to switch in [SUB MEMORY LIST].
3) Press the <ENTER> button.
f
This switches to the signal selected in Step
2)
.
Deleting the sub memory
1) Press
qw
on the normal screen (when the menu is not displayed).
f
The
[SUB MEMORY LIST]
screen is displayed.
2) Press
asqw
to select the sub memory to be deleted, and press the <DEFAULT> button on the
remote control.
f
The
[REGISTERED SIGNAL DELETE]
screen is displayed.
f
To cancel the deletion, press the <MENU> button to return to the
[SUB MEMORY LIST]
screen.
3) Press the <ENTER> button.
f
The selected sub memory will be deleted.
