f
H
: 15.75 kHz, f
V
: 60 Hz [480i (525i)]
f
H
: 31.50 kHz, f
V
: 60 Hz [480p (525p)]
f
H
: 15.63 kHz, f
V
: 50 Hz [576i (625i)]
f
H
: 31.25 kHz, f
V
: 50 Hz [576p (625p)]
f
H
: 45.00 kHz, f
V
: 60 Hz [720 (750)/60p]
f
H
: 37.50 kHz, f
V
: 50 Hz [720 (750)/50p]
f
H
: 33.75 kHz, f
V
: 60 Hz [1035/60i]
f
H
: 33.75 kHz, f
V
: 60 Hz [1080 (1125)/60i]
f
H
: 28.13 kHz, f
V
: 50 Hz [1080 (1125)/50i]
f
H
: 28.13 kHz, f
V
: 25 Hz [1080/25p]
f
H
: 27.00 kHz, f
V
: 24 Hz [1080/24p]
f
H
: 27.00 kHz, f
V
: 48 Hz [1080/24sF]
f
H
: 33.75 kHz, f
V
: 30 Hz [1080/30p]
f
H
: 67.50 kHz, f
V
: 60 Hz [1080/60p]
f
H
: 56.25 kHz, f
V
: 50 Hz [1080/50p]
24.4 mm ( 0.96 in) diagonal (16:10 aspect ratio)
DLP™ chip × 3, DLP™ projection system
2,304,000 (1,920 × 1,200 ) × 3,
total of 6,912,000 pixels
1.78 –15.24 m (70 – 600 in),
1.78 – 7.62 m (70 –300 in) with the ET-D75LE50,
16:10 aspect ratio
20,000 lm (four-lamp)
1,920 × 1,200 pixels
±55 % (±44 % with the ET-D75LE6 )
from center of screen (powered)
±20 % (±15 % with the ET-D75LE6 )
from center of screen (powered)
Vertical: ±40° *
6
, horizontal: ±15°
Vertical: ±45° *
6
*
8
, horizontal: ±40°*
7
*
8
Logo Transfer Software, Multi Projector Monitoring & Control Software,
Geometry Manager Pro (included in the ET-UK20 )
24.1 mm ( 0.95 in) diagonal (4:3 aspect ratio)
DLP™ chip × 3, DLP™ projection system
1,470,000 (1,400 × 1,050 ) × 3,
total of 4,410,000 pixels
1.78 –15.24 m (70 – 600 in),
1.78 – 7.62 m (70 –300 in) with the ET-D75LE50,
4:3 aspect ratio
1,400 × 1,050 pixels
( Input signals that exceed this resolution will
be converted to 1,400 × 1,050 pixels.)
±50 % (±40 % with the ET-D75LE6 )
from center of screen (powered)
±30 % (±20 % with the ET-D75LE6 )
from center of screen (powered)
21.6 mm ( 0.85 in) diagonal (16:9 aspect ratio)
DLP™ chip × 3, DLP™ projection system
1,049,088 (1,366 × 768 ) × 3,
total of 3,147,264 pixels
1.78 –15.24 m (70 – 600 in),
1.78 – 7.62 m (70 –300 in) with the ET-D75LE50,
16:9 aspect ratio
17,000 lm (four-lamp)
1,366 × 768 pixels
( Input signals that exceed this resolution will
be converted to 1,366 × 768 pixels.)
–
±70 % (± 60 % with the ET-D75LE6 )
from center of screen (powered)
±30 % (±20 % with the ET-D75LE6 )
from center of screen (powered)
Vertical: ±40° *
6
–
–
Logo Transfer Software, Multi Projector
Monitoring & Control Software
200 –240 V AC, 50 /60 Hz ( Max current requirements: 12 A @200 V )
2,300 W ( 0.3 W with
STANDBY MODE
set to
ECO
,*
1
9 W with
STANDBY MODE
set to
NORMAL
.)
Max. 7,848 BTU /hour (without light output: 7,585 BTU /hour)
Optional powered zoom and fixed-focus lenses
465 W UHM lamp × 4, replacement cycle of up to 2,000 hours*
2
90 %
10,000:1 (full on /off, with dynamic iris set to “3” )
SMPTE ST 259 compliant, [ YC
B
C
R
4:2:2 10-bit] 480i, 576i
SMPTE ST 292 compliant, [ YC
B
C
R
4:2:2 10-bit] 720 /50p, 720 /60p, 1035/60i, 1080 /50i,
1080 /60i, 1080 /25p, 1080 /24p, 1080 /24sF, 1080 /30p
SMPTE ST 372 compliant, [ RGB 4:4:4 12-bit/10-bit] 1080 /50i, 1080 /60i, 1080 /25p, 1080 /24p,
1080 /24sF, 1080 /30p, [ X´ Y´Z´ 4:4:4 12-bit] 2,048 × 1,080 /24p, 2,048 × 1,080 /24sF
SMPTE ST 424 compliant, [ YP
B
P
R
4:2:2 10-bit] 1080 /50p, 1080 /60p, [ RGB 4:4:4 12-bit/10-bit]
1080 /50i, 1080 /60i, 1080 /25p, 1080 /24p, 1080 /24sF, 1080 /30p
480p, 576p, 720 /60p, 720 /50p, 1080 /60i, 1080 /50i, 1080 /24p, 1080 /24sF, 1080 /25p, 1080 /30p, 1080 /60p, 1080 /50p
VGA ( 640 × 480 ) –WUXGA*
4
(1,920 × 1,200 ), compatible with non-interlaced signals only, dot clock: 25–162 MHz
f
H
: 15–100 kHz, fV: 24 –120 Hz, dot clock: 20 –162 MHz
f
H
: 15.75 kHz, f
V
: 60 Hz [ NTSC/ NTSC4.43/ PAL-M / PAL60 ], f
H
: 15.63 kHz, f
V
: 50 Hz [ PAL / PAL-N /SECAM ]
Ceiling /floor, front/rear
BNC × 1 (3G/HD/SD-SDI)
BNC × 1 ( HD/SD-SDI)
BNC × 1 (3D timing signal)
BNC × 1 (3D timing signal)
DVI-D 24-pin × 1 ( DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI 19-pin × 1 ( Deep Color, compatible with HDCP)
BNC × 5 ( RGB/ YP
B
P
R
/ YC
B
C
R
/ YC × 1)
D-Sub HD 15-pin (female) × 1 ( RGB/ YP
B
P
R
/ YC
B
C
R
× 1)
BNC × 1 (composite video)
D-sub 9-pin (female) × 1 for external control ( RS-232C compliant)
D-sub 9-pin (male) × 1 for link control
M3 × 1 for wired remote control
M3 × 1 for link control (for wired remote control)
D-sub 9-pin (female) × 1 for external control (parallel)
RJ-45 × 1 (for network connection, 10Base-T/100Base-T X, compliant with PJLink™)
Molded plastic
620 × 291*
9
× 800 mm (24-7/16 × 11-15/32*
9
× 31-1/2 in) (optional lens not included)
Approximately 43 kg ( 94.8 lbs) (optional lens not included)
U / EJ models: 965 × 418 × 865 mm (38 × 16-15/32 × 34-1/16 in), E models: 946 × 402 × 846 mm (38 × 15-13/16 × 33-5/16 in).
U models: 53 kg (116.8 lbs), EJ models: 54 kg (119.0 lbs), E models: 51 kg (112.4 lbs)
49 dB (quad lamp operation)
Operating temperature: 0 – 45 °C (32 –113 °F )*
11
, operating humidity: 20 – 80 % (no condensation)
Power cord with secure lock, wireless/wired remote control unit, batteries ( R6/A A type × 2)
Model
Power supply
Power consumption
Dissipation BTU
DLP™ chip
Lens
Lamp
Screen size (diagonal)
Brightness*
3
Center-to-corner uniformity*
3
Contrast*
3
Resolution
Scanning frequency
Optical axis shift*
5
Keystone correction range
Keystone correction range
with optional Upgrade Kit
Installation
Terminals
Cabinet materials
Dimensions (W × H × D)
Weight*
10
Shipping dimensions (W × H × D)
Shipping weight
Operation noise*
3
Operating environment
Applicable software
Supplied accessories
Panel size
Display method
Pixels
SDI
SD-SDI
HD-SDI
Dual-link HD-SDI
3G-SDI
HDMI/DVI-D
RGB
YP
B
P
R
(YC
B
C
R
)
Video/YC
Vertical
Horizontal
SDI 1 IN
SDI 2 IN
3D SYNC IN/OUT
3D SYNC OUT
DVI-D IN
HDMI IN
RGB 1 IN
RGB 2 IN
VIDEO IN
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
REMOTE 2 IN
LAN
PT-
DS20K
PT-
DW17K
PT-
DZ21K
Specifications
*1
When the
STANDBY
MODE
is set to
ECO
, network functions such as power on over the LAN
will not operate. Also, only certain commands can be received for external control
using the serial terminal.
*2
The usage environment affects the lamp replacement cycle.
*3
Measurement, measuring conditions, and method of notation all comply with ISO
21118 international standards.
*4
WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB
(Coordinated Video Timing-Reduced Blanking).
*5
Optical axis shift cannot be operated with the ET-D75LE50.
*6
±22° with the ET-D75LE50, ±28° with the ET-D75LE6, and ±40° with the
ET-D75LE10 and ET-D75LE20.
*7
Up to ±15° with the ET-D75LE50 and ET-D75LE6.
*8
Up to a total of ±55° during simultaneous horizontal and vertical correction.
*9
With legs at shortest position.
*10
Average value. May differ depending on the actual unit.
*11
The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the fan
control is set to
HIGH
ALTITUDE
MOD
e (for altitudes from 1,400 m to 2,700 m (4,593 ft
to 8,858 ft) above sea level). When the projector is used with the ET-SFR510 Smoke
Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the
projector cannot be used in places at high altitude.
620
800
(24-7/16)
(31-1/2)
29
1
(1
1-
15
/3
2)
Dimensions
unit: mm (inches)
1. Do not install the projector in locations that are subject to excessive water, humidity, steam,
or oily smoke. Doing so may result in fire, malfunction, or electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This
lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.
3. The projector uses of high-wattage lamp that becomes very hot during operation. Please
observe the following precautions:
• Never place objects on top of the projector while it is operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 inches) or more around
the projector’s exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple
(stacked) projection. When stacking projector units, be sure to provide the amount of
space indicated between them. These space requirements also apply to installation where
only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, temperature of the air surrounding the
projector must be between 0 °C (32 °F ) and 35 °C ( 95 °F ). Also make sure the projec-
tor’s intake and exhaust openings are not blocked. Take particular care to ensure that hot
air from the exhaust openings is not sucked into the intake.
4. If the projector is to be operated continuously 24 hours a day / 7 days a week, use the mul-
ti-lamp optical system’s alternating lamp operation (lamp changer) function. The projector
can be operated continuously 24 hours a day / 7 days a week in four-lamp operation mode,
but it will automatically operate with three lamps for 8 hours of the 24 hours / 7 days.
5. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly
for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly
depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
6. Because the ET-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used
with it.
7. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an
indication of faulty lamp performance.
N OT E S O N U S E
