Panasonic PT-DW730U Operating Instructions Manual Download Page 77

Page: 77 / 108

[NETWORK] menu

ENGLISH - 77

Settings

■

Error information page

When [Error (Detail)] is displayed on the [Projector status] screen, click it to display the error details.

The projector may go into the standby status to protect the projector depending on the contents of the

error.

[OK]: Normal operation

[FAILED]: Occurrence of trouble

Description of problem occurrence [FAILED]:

Parameter

Description

[MAIN CPU BUS]

There is a problem with the microcomputer circuitry. Consult your

dealer.

[FAN]

There is a problem with the fan or the fan drive circuit. Consult your

dealer.

[INTAKE AIR TEMPERATURE]

The air intake temperature is too high. It may be used in an operating

environment where the temperature is high, such as near a heating

appliance.

[OPTICS MODULE TEMPERATURE]

The temperature inside the projector is high. It may be used in an

operating environment where the temperature is high, such as near a

heating appliance.

[AROUND LAMP TEMPERATURE]

The temperature around the lamp is high. The air exhaust port may

be blocked.

[LAMP1 REMAIN TIME]

The usage time of the lamp has exceeded the specified time, and it is

time to replace the lamp.

[LAMP2 REMAIN TIME]
[LAMP1 STATUS]

The lamp has failed to turn on. Wait a while until the luminous lamp

cools off, and then turn on the power.

[LAMP2 STATUS]
[SHUTTER]

There is a problem with the shutter circuitry. Consult your dealer.

[INTAKE AIR TEMP.SENSOR]

There is a problem with the sensor used to detect intake air

temperature. Consult your dealer.

[OPTICS MODULE TEMP.SENSOR]

There is a problem with the sensor used to detect temperature inside

the projector. Consult your dealer.

[AROUND LAMP TEMP. SENSOR]

There is a problem with the sensor used to detect exhaust air

temperature. Consult your dealer.

[BATTERY]

The battery replacement is required. Consult your dealer.

[AIRFLOW SENSOR]

There is a problem with the air volume sensor. Consult your dealer.

[COLOR WHEEL]

There is a problem with the color wheel or the color wheel drive

circuit. Consult your dealer.

[COVER OPEN]

The attachment of the lamp unit cover is incomplete. Check the lamp

unit cover. (



page 92)

[FILTER UNIT]

The air filter unit is not attached. Check the air filter unit. (



page 90)

[AIR FILTER]

There are too much dust accumulated in the air filter unit.

Set the <MAIN POWER> switch (



page 35) to <OFF>, and clean the

air filter (



page 89).

Summary of Contents for PT-DW730U













































































































Search results

Summary of Contents for PT-DW730U

Reviews:

Brands by name

Popular brands

Panasonic PT-DW730U, Operating Instructions Manual

Search results

Summary of Contents for PT-DW730U

Reviews:

Brands by name

Popular brands