Panasonic PT-DW530, Spec File

Page: 2 / 14

S
P E C
F
I L E
PT- DW530
DLP ™ Projector
As of May 2011
SFD10M013-1
2 / 1 4
Specifications
Main unit
Power supply
Power consumption
DLP™ chip Panel size
Display method
Pixels
Lens
Throw ratio 16:10 aspect ratio
16:9 aspect ratio
Lamp
Screen size
Brightness* 2
Center-to-corner uniformity* 2
Contrast* 2
Resolution
Scanning frequency HDMI/DVI-D
RGB
YP
B
P
R
(YC
B
C
R
)
Video/S-Video
Optical axis shift
Keystone correction range
Installation
Terminals HDMI IN
DVI-D IN
RGB 1 IN
R, G, B
Y, P
B
, P
R
(Y, C
B
, C
R
)
100 –240 V AC, 5.0 –1.9 A, 50/60 Hz
415 W (500 VA)
(0.3 W at 100 –120 V AC, 0.4 W at 220 – 240 V AC with standby mode
set to eco* 1 , 15 W with standby mode set to normal. Both with fan
stopped.)
16.5 mm (0.65 inches) diagonal (16:10 aspect ratio)
DLP™ chip × 1, DLP™ system
1,024,000 (1,280 × 800) × 1, total of 1,024,000 pixels
Manual zoom (2× zoom), manual focus F 2.0 – 3.4, f 21.5 – 43.0 mm
1.53 – 3.09:1
1.53 – 3.09:1
300 W (max. 310 W) UHM lamp
1.02–7.62 m (40 – 300 inches), 16:10 aspect ratio
4,000 lumens (lamp mode: normal)
90%
2,000:1 (full on/full off)
1,280 × 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 × 800 pixels.)
f
H
: 27 kHz – 100 kHz, f
V
: 24 Hz –120 Hz, dot clock: 25 MHz–162 MHz
f
H
: 15 kHz – 100 kHz, f
V
: 24 Hz –120 Hz, dot clock: 162 MHz or lower
480i (525i): f
H
15.75 kHz; f
V
60 Hz,
576i (625i): f
H
15.63 kHz; f
V
50 Hz,
480p (525p): f
H
31.50 kHz; f
V
60 Hz,
576p (625p): f
H
31.25 kHz; f
V
50 Hz,
720 (750)/60p: f
H
45.00 kHz; f
V
60 Hz,
720 (750)/50p: f
H
37.50 kHz; f
V
50 Hz,
1035/60i: f
H
33.75 kHz; f
V
60 Hz,
1080 (1125)/60i: f
H
33.75 kHz; f
V
60 Hz,
1080 (1125)/50i: f
H
28.13 kHz; f
V
50 Hz,
1080/25p: f
H
28.13 kHz; f
V
25 Hz,
1080/24p: f
H
27.00 kHz; f
V
24 Hz,
1080/24sF: f
H
27.00 kHz; f
V
48 Hz,
1080/30p: f
H
33.75 kHz; f
V
30 Hz,
1080/60p: f
H
67.50 kHz; f
V
60 Hz,
1080/50p: f
H
56.25 kHz; f
V
50 Hz
f
H
: 15.75 kHz, f
V
: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
f
H
: 15.63 kHz, f
V
: 50 Hz [PAL/PAL-N/SECAM]
Vertical: +70% (manual), horizontal: ±10% (manual)
Vertical: ±40°
Ceiling/floor, front/rear
HDMI 19-pin × 1, Deep Color, HDCP compatible
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
VGA (640 × 480) – WUXGA (1,920 × 1,200), compatible with non-
interlaced signals only, dot clock: 25 MHz –162 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz,
32 kHz)
DVI-D 24-pin × 1, DVI 1.0 compliant, HDCP compatible, for single link
only
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
VGA (640 × 480) – WUXGA (1,920 × 1,200), compatible with non-
interlaced signals only, dot clock: 25 MHz –162 MHz
BNC × 5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD/VD, SYNC: High impedance, TTL (positive/negative)
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), P
B
/P
R
(C
B
/C
R
): 0.7 Vp-p, 75 ohms