Panasonic PT-DW105XEA, Operating Instructions (Functional Manual)

Page: 73 / 130

DISPLAY OPTION menu
ENGLISH -
73
Settings
J
Adjusting the position
automatically
1. Select [POSITION ADJUST] in step 3).
2. Press ◄► to switch [POSITION
ADJUST].
z
The setting will change as follows each time
◄► is pressed.
OFF ON
OFF Automatic adjustment is off.
ON
Screen position and size are
adjusted during AUTO SETUP
operation.
J
Adjusting the signal level
automatically
1. Select [SIGNAL LEVEL ADJUST] in
step 3).
2. Press ◄► to switch [SIGNAL LEVEL
ADJUST].
z
The setting will change as follows each time
◄► is pressed.
OFF ON
OFF Automatic adjustment is off.
ON
The black level (On-screen menu
[BRIGHTNESS]) and white level
(On-screen menu [CONTRAST])
are adjusted during AUTO SETUP
operation.
Note
z
If the input image is not a still image with a clear
difference between black and white, the [SIGNAL LEVEL
ADJUST] function may not operate normally.
RGB IN
(Only RGB input)
Change this setting to change the input impedance of
the synchronous signal input.
1 ) Press ▲▼ to select [RGB IN].
2 ) Press <ENTER> button.
z
The [ RGB IN ] screen will be displayed.
3 ) Press ▲▼ to select [RGB1 SYNC
TERMINAL] or [RGB2 SYNC
TERMINAL].
4 ) Press ◄► to switch.
z
The setting will change as follows each time
◄► is pressed.
LOW HIGH
LOW Input impedance is set to [LOW].
HIGH
Input impedance is set to [HIGH].
DVI-D IN
Change this setting if video does not display normally
when the projector and an external device are
connected via DVI.
1 ) Press ▲▼ to select [DVI-D IN].
2 ) Press <ENTER> button.
z
The [ DVI-D IN ] screen will be displayed.
3 ) Press ▲▼ to select [DVI EDID].
4 ) Press ◄► to switch [DVI EDID].
z
The setting will change as follows each time
◄► is pressed.
EDID3 EDID1 EDID2 : PC
EDID3
Switch between fine settings for a
moving image and for a still image.
EDID1
Mainly select this when an external
device (DVD player, etc.) for
outputting video signals of a moving
image system is connected to DVI-D
IN.
EDID2 : PC
Mainly use this when an external
device (PC, etc.) for outputting video
signals of a still image system is
connected to DVI-D IN.
5 ) Press ▲▼ to select [DVI SIGNAL
LEVEL].