background image

3

WARNING: 

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

–   Reorient or relocate the receiving antenna.

–   Increase the separation between the equipment and receiver.

–   Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

–   Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION: 

To assure continued compliance, use only shielded interface cables when

connecting to computer or peripheral devices. Any unauthorized changes or

modifications to this equipment could void the user’s authority to operate.

NOTICE: 

This product has a High Intensity Discharge (HID) lamp that contains a small amount
of mercury. It also contains lead in some components. Disposal of these materials

may be regulated in your community due to environmental considerations. For

disposal or recycling information please contact your local authorities, or the

Electronics Industries Alliance: <http://www.eiae.org.>

Declaration of Conformity

Model Number:

PT-D3500U

Trade Name:

Panasonic

Responsible Party:

Matsushita Electric Corporation of America
One Panasonic Way, Secaucus, NJ 07094

Telephone Number:

1-800-524-1448 or 1-800-526-6610

Email:

[email protected]

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference receiver, including interference that may
cause undesired operation.

WARNING: 

Not for use in a computer room as defined in the Standard for the Protection of Electronic

Computer/Data Processing Equipment, ANSI/NFPA 75.

Summary of Contents for PT-D3500U Series









































































Reviews: