Setting up
22
- ENGLISH
Getting Started
Setting up
Projection method
You can use the projector with any of the following 4 projection methods to set the desired method in the projector.
J
Mounting on the ceiling
and projecting forward
Mounting on the ceiling
J
and projecting from rear
(Using translucent screen)
Setting on a desk/floor
J
and projecting from
forward
J
Setting on a desk/floor
and projecting rear
(Using translucent screen)
Attention
For optimum viewing quality, install the projector in a location where screen exposure to outside light, light from light fixtures
z
or other light is at a minimum. Also draw the curtains, close blinds and turn off light fixtures.
Parts for ceiling or wall mount (Optional)
You can install the projector on the ceiling or wall by using the optional ceiling mount bracket (ET-PKV100H: for
high ceiling, ET-PKV100S: for low ceiling), the optional projector mount base ET-PKC200B, and the optional wall
mount bracket ET-PKC200W.
Use only the ceiling mount brackets or wall mount bracket specified for this projector.
z
Refer to the installation manual for the ceiling mount bracket or wall mount bracket when you install the bracket
z
or hanger and the projector.
Attention
To ensure projector performance and security, installation of the ceiling mount bracket
z
or wall mount bracket must be
carried by your dealer or a qualified technician.
