Audio
42
- ENGLISH
Settings
Audio
Select [Audio] from the Main Menu (see “How
to operate menu” on page 33) and then select
the item from the Sub Menu.
Mute
Temporarily turn off the sound.
Press ▲▼ to select [Mute].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ◄► to switch [On]/[Off].
3 )
On
Mute.
Off
Output audio.
Press
z
<MUTE> button on the remote control
can also turn on/off the sound.
Volume
Adjust the volume
.
Press ▲▼ to select [Volume].
1 )
Press ►
to display the adjustment
2 )
dialog box.
Press ◄► to adjust the volume.
3 )
Operation
Adjustment
Adjustment
range
Press ►.
Turn up the volume
Maximum value 32
Press ◄.
Turn down the
volume
Minimum value 0
You can also press the </-> buttons
z
on the remote control or on the control panel.
In Standby Mode (Audio)
This function is used to switch the output sound On/
Off at standby mode.
Press ▲▼ to select [In Standby Mode
1 )
(Audio)].
Press ►
to display the adjustment
2 )
dialog box.
Press ◄► to switch [On]/[Off].
3 )
On
Output audio when in Standby
mode.
Off
Mute the sound when in Standby
mode.
Note
When setting the [In Standby Mode (Audio)] function
z
to [On] and in Standby mode status, the sound of the
selected input source can be output from the <AUDIO
OUT (VARIABLE)>.
When setting the [In Standby Mode (Audio)] function to
z
[On] and in Standby mode status, use remote control to
switch input sources, sound volume can be adjusted with
</-> buttons on the remote control.
When the projector changes from projection status to
z
standby status, the sound of Computer 1 input will be the
default output sound in spite of the selected input during
projection. Press the source buttons on the remote
control to switch to different sound.
The sound of HDMI does not output even if the [In
z
Standby Mode (Audio)] is set to [On].
