LAN
ENGLISH -
49
Settings
Select [LAN] from the Main Menu (see “How to
operate menu” on page 35) and then select the
item from the Sub Menu.
Note
The following settings are set before the projector
z
leaves the factory.
DHCP
Off
IP address
192.168.10.100
Subnet Mask
255.255.255.0
Gateway
192.168.10.1
DNS
NONE
If you want to use a DHCP server, please make
z
sure that the DHCP server is enabled.
For more information about the IP Address, Subnet
z
Mask, Gateway, and DNS, please contact your
network administrator.
DHCP
Set whether to use DHCP server.
Press ▲▼ to select [DHCP].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ▲▼ to switch [On]/[Off].
3 )
Press <MENU> button to exit the switching and
z
go back to the previous menu.
Press ► to confirm.
4 )
After selecting [On], the message about LAN
z
restarting will be displayed. The setting of
DHCP finishes when the message disappears.
Press <MENU> to exit.
5 )
On
The projector will acquire the IP
address automatically.
Off
User must set the [IP Address],
[Subnet Mask], [Gateway] and
[DNS] manually.
IP Address
Select an IP Address of projector connected to
network.
Press ▲▼ to select [IP Address].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ▲▼◄► to input digit numbers.
3 )
Press <MENU> to exit.
4 )
Subnet Mask
Select Subnet Mask of projector for network
connection.
Press ▲▼ to select [Subnet Mask].
1 )
Press ►
to display the setting dialog box.
2 )
Press ▲▼◄► to input digit numbers.
3 )
Press <MENU> to exit.
4 )
Gateway
Select Gateway of projector for network connection.
Press ▲▼ to select [Gateway].
1 )
Press ►
to display the setting dialog
2 )
box.
Press ▲▼◄► to input digit numbers.
3 )
Press <MENU> to exit.
4 )
DNS
Select DNS of projector for network connection.
Press ▲▼ to select [DNS].
1 )
Press ►
to display the setting dialog box.
2 )
Press ▲▼◄► to input digit numbers.
3 )
Press <MENU> to exit.
4 )
LAN
