Panasonic PT-CW230E Operating Instructions Manual Download

Page: 53 / 79

Setting

ENGLISH -

Settings

Logo

This function allows you to customize the screen logo

with [Logo select], [Logo PIN code lock] and [Logo

PIN code change] functions.

Press ▲▼ to select [Logo].

1 )

Press ► or the <SELECT> button.

2 )

Press ▲▼ to choose the desired item.

3 )

Logo select

This function decides on the starting-up display from

among following options.

Off

Show the countdown display only.

Default

Show the factory-set logo.

Logo PIN code lock

This function prevents an unauthorized person from

changing the screen logo.

Off

The screen logo can be changed freely

from the Logo Menu.

The screen logo cannot be changed

without a Logo PIN code.

Note

If you want to change the Logo PIN code lock setting,

press the <SELECT> button and the Logo PIN code

dialog box appears. Enter a Logo PIN code by following

the steps below. The initial Logo PIN code is set to “4321”

at the factory.

Logo PIN code change

Logo PIN code can be changed to your desired four-

digit number.

Press ▲▼ to select [Logo PIN code

1 )

change] and press the <SELECT>

button.

Current logo PIN code dialog box appears.

Press ▲▼ to enter the current code,

2 )

press the ► button to fix the number

and move the red frame pointer to the

next box.

The New Logo PIN code input dialog box

appears.

Repeat this step to set the new Logo

3 )

PIN code.

Attention

Be sure to note the new Logo PIN code and keep it on

hand. If you lost the number, you could no longer change

the Logo PIN code setting.

HDMI setup

This function is only used for HDMI input source.

Press ▲▼ to select [HDMI setup].

1 )

Press ► or the <SELECT> button.

2 )

The names for the output setting of Digital R/G/

B vary from equipment to equipment.

Image

Normal

When the output of Digital R/G/B

equipment is set to Standard.

Enhanced

When the output of Digital R/G/B

equipment is set to Enhanced.

Sound

HDMI

When Digital input source is input,

Sound is set to HDMI.

Computer

When DVI input source is changed

to HDMI input source, Sound is set

to Computer 1.

Note

For details, refer to the operating instructions of your

Digital R/G/B equipment.

Terminal

The COMPUTER 2 IN/MONITOR OUT terminal on

the back of the projector is switchable for computer 2

input or monitor output.

Press ▲▼ to select [Terminal] and

1 )

then press the <SELECT> button.
Press ▲▼ to switch the item.

2 )

Computer 2

Computer input

Monitor out

Monitor out

Note

Terminal function is not available when selecting

[Computer 2] to the input source. Change the input

source to the others (Computer 1, HDMI,S-video or

Video) so that the Terminal function will be available.

Summary of Contents for PT-CW230E
















































































Search results

Summary of Contents for PT-CW230E

Reviews:

Related manuals for PT-CW230E

Brands by name

Popular brands

Panasonic PT-CW230E, Operating Instructions Manual

Search results

Summary of Contents for PT-CW230E

Reviews:

Related manuals for PT-CW230E

Brands by name

Popular brands