Specifications
Power supply
Power consumption
Amps
LCD panel*
1
Panel size
Aspect ratio
Display method
Drive method
Pixels
Lens
Lamp*
2
Brightness
Contrast
Centre-to-corner uniformity ratio
Colours
Projection size
Throw distance
Screen aspect ratio
Resolution
Scanning frequency for RGB
100–240 V AC, 50/60 Hz
290 W (Approx. 0.08 W in standby
mode with fan stopped)
2.2 A–1.0 A
0.7˝ (17.78 mm) diagonally
16:9 aspect ratio
Transparent LCD panel (x 3, R/G/B)
Active matrix
921,600 (1280 x 720) x 3, total of
2,764,800 pixels
Manual zoom (2x)/Manual focus,
F 1.9 - 3.1, f 21.7 mm - 43.1 mm
220 W UHM™ lamp
2,000 lumens*
1
6,000:1*
3
(full on/full off)
85%
Full colour (1,070,000,000 colours)
1,016–5,080 mm (40–200 inches)
diagonally, 16:9 aspect ratio
1.2 m–12.4 m (3´11˝–40´8˝)
16:9 (4:3 compatible)
RGB: 1280 x 720 pixels (1920 x 1080
pixels with compression)
Horizontal: 30–70 kHz,
Vertical: 50–87 Hz
YP
B
P
R
signal compatibility
Colour system
Optical axis shift*
4
Keystone correction range
Installation
OSD languages
Terminals
S-VIDEO IN
VIDEO IN
PC (RGB) IN
COMPONENT IN
HDMI IN
SERIAL
525i (480i), 525p (480p), 625i (576i),
625p (576p), 750 (720)/50p,
750 (720)/60p, 1,125 (1,080)/24p,
1,125 (1,080)/50i, 1,125 (1,080)/50p,
1,125 (1,080)/60i, 1,125 (1,080)/60p
PAL, PAL-M, PAL-N, PAL 60, SECAM,
NTSC, NTSC 4.43,
Horizontal ±25% and vertical ±63%
Vertical: approx. ±30°
Ceiling/desk, front/rear
(menu selection)
English, French, German, Spanish,
Italian, Chinese, Korean, Russian,
Swedish, Danish, Norwegian, Polish,
Czech, Hungarian, Portuguese, Thai
Mini DIN 4-pin x 1, Y: 1.0 Vp-p,
C: 0.286 Vp-p, 75 ohms
RCA pin x 1, 1.0 Vp-p, 75 ohms
D-sub HD 15-pin (female) x 1
R, G, B: 0.7 Vp-p (1.0 Vp-p for Sync on
G), 75 ohms
HD/SYNC, VD: TTL, high impedance
(positive/negative polarity)
RCA pin (Y, P
B
/C
B
, P
R
/C
R
) x 1,
Y: 1.0 p-p, 75 ohms
P
B
/P
R
(C
B
/C
R
): 0.7 Vp-p, 75 ohms
19-pin HDMI connector x 1
Mini DIN 8-pin x 1 (RS-232C based)
Power cord length
Cabinet material
Dimensions*
5
(W x H x D)
Weight
Operating environment
Remote control unit
Power supply
Operation range
Dimensions
(W x H x D)
Weight
Supplied accessories
Optional accessories
ET-LAX100
ET-PKX100
ET-ADSER
3 m (9´10˝)
ABS/PC
395 x 112 x 300 mm
(15-17/32˝ x 4-13/32x˝ x 11-25/32˝)
4.9 kg (10.8 lbs.)
Temperature: 0°–40°C (32°–104°F)
Humidity: 20%–80% (no condensation)
3 V DC (UM-3 (AA) battery x 2)
Approx. 7 m (23´) when operated
from directly in front of the signal
receptor
48 x 138 x 28 mm
(1-7/8˝ x 7-27/32˝ x 1-3/32˝)
125 g (4.4 oz.) (including batteries)
Power cord, Wireless remote control
unit, Batteries for remote control
(UM-3 x 2)
Replacement lamp unit
Ceiling mount bracket
Serial adaptor (DIN 8-pin/D-sub 9-pin)
2
7
1
.1
(1
0
-
2
1
/3
2
)
1
1
2
(4
-
1
3
/3
2
)
1
2
1
(4
-
3
/4
)
6
9
(1
1
/1
6
)
3
0
0
(1
1
-
2
5
/3
2
)
395 (15-17/32)
102.5 (4-1/32)
Unit: mm (inch)
Dimensions
*1: The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision technology designed to provide one of the
finest possible images. Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please note that this is an intrinsic characteristic of the manufacturing
technology that affects all products using LCD technology.
*2: The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or
extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
*3: In AI mode, with dynamic iris on.
*4: Shift range is limited during simultaneous horizontal and vertical shifting.
*5: Excluding protrusions
Ecology-Conscious Design
Panasonic strives to minimise environmental
impact caused by its products through careful
consideration of design, production, delivery,
process and product life cycle. The PT-AX100E
reflects the following ecological considerations.
• Lead-free solder is used to mount compo-
nents on the printed circuit boards.
• No halogenated flame retardants are used in
the cabinet.
• No polystyrene foam is used in the packing
materials.
• Lead-free glass is used for the lens.
• The packing case and operating manual are
made from recycled paper.
• Lamp power switching further reduces
power consumption.
• Standby power consumption is a mere 0.08
watts in the standby mode.
Please contact Panasonic or your dealer for a demonstration.
Weights and dimensions shown are approximate. Specifications are subject to change without notice.
This product may be subject to export control regulations. UHM is a trademark of Matsushita Electric
Industrial Co., Ltd. VGA and XGA are trademarks of International Business Machines Corporation.
All other trademarks are the property of their respective trademark owners. Projection images simulated.
PT-AX100E1-06SEP32K Printed in Japan.
Projector Global Web Site
http://panasonic.co.jp/pavc/global/projector
