Remote control operation
E
NGLISH
- 25
Basic Operation
4. Press
ENTER
to store the adjusted result.
“
PROCESSING
” is displayed for a few seconds
and the result is stored in
LOG
.
You can store up to 8 logs under
LOG
for each
PICTURE MODE
setting.
5. Press
MENU
or
RETURN
to return to the
previous menu.
Repeat the steps above to store more
adjustment.
Q
Managing stored logs
You can edit or delete the stored logs of the
selected
PICTURE MODE
.
1. Select
LOG
and press
ENTER
.
The
LOG
menu is displayed.
2. Select the required log from 1 - 8 or
ALL
DELETE
, and press
ENTER
.
Select
CHANGE
to edit the log.
The cursor menu is displayed and you can
readjust the colour.
Select
DELETE
to delete the log.
The confirmation screen will be displayed.
Select
OK
to delete.
When you select
ALL DELETE
, the
"DELETE
ALL LOG."
screen is displayed. Select
OK
to
delete all logs. The
PROFILE
setting will be set
to
NORMAL
.
Q
Saving a log setting as a profile
Return to the
COLOUR MANAGEMENT
menu
and save the stored log as a profile. Make sure that
the
PICTURE MODE
is not switched.
1. Select the
PROFILE SAVE
menu and press
ENTER
The
PROFILE SAVE
menu is displayed. You
can save the profile as
USER1
,
USER2
and
USER3
.
2. Press
ENTER
to save the profile
The confirmation screen is displayed. Press
ENTER
again to save.
J
Loading saved profiles
When profiles are loaded under the
PICTURE
MODE
setting, you can keep them as you defined
until the
PROFILE
is set to
NORMAL
.
1. Select the required
PICTURE MODE
and
press
ENTER
.
2. Press the
COLOR MANAGEMENT
button
and select the
PROFILE
menu.
The profile settings of the selected
PICTURE
MODE
will be displayed.
3. Select the required profile and press
ENTER
.
COLOUR
Adjust the vividness of the colour.
Setting range: -30 to +30
Default: 0
TINT
Adjust the colour tone.
Setting range: -30 to +30
Default: 0
BRIGHTNES
S
Adjust the brightness of the colour.
Setting range: -20 to +20
Default: 0
PICTURE MODE : CINEMA1
POINT1
POINT2
POINT3
POINT4
POINT5
POINT6
POINT7
POINT8
ALL DELETE
Sampled colour
Adjusted colour
NORMAL
Return to the default setting of the
PICTURE MODE
USER1
Defined profile settings.
USER2
USER3
NOTE:
LOG
and
PROFILE SAVE
are not displayed
before you apply
COLOUR MANAGEMENT
.
If you load a profile with a different attribute mode
of the profile, the
CURSOR
and
PROFILE SAVE
menus will not be displayed.
The approximate colours will be adjusted at the
same time. If you adjust the exact same colour
differently, both colours will affect each other and
you might get unexpected results.
White, Black and Grey are not adjustable.
If you escape the
COLOUR MANAGEMENT
menu or attempt to perform another menu action
before you save the adjusted profile, the
confirmation screen will be displayed.
If you switch the input signal before you save the
profile, the setting will be cancelled without notice.
USER3
USER2
USER1
Summary of Contents for PT-AX100E
Page 52: ......
