PICTURE menu
E
NGLISH - 31
MEMORY LOAD
You can access the saved settings instantly. See
“Loading a saved setting” on page 14.
Select a setting from
1.
MEMORY 1 - 16
.
Undefined settings will not be selectable.
Press the
2.
ENTER
button to activate.
NOTE:
If you have not saved any settings,
•
MEMORY 1 - 16
will not be displayed.
MEMORY EDIT
You can edit the named memory settings.
Deleting a memory setting
Q
Select
1.
MEMORY DELETE
and press the
ENTER
button.
Select the required memory setting and press the
2.
ENTER
button.
If you select
ALL DELETE
, you can delete all of the
saved memory settings.
Select
3.
OK
in the confirmation screen and press
the
ENTER
button.
Changing the name of the memory
Q
setting
Select
1.
MEMORY NAME CHANGE
and press the
ENTER
button.
Select the required memory setting and press the
2.
ENTER
button.
Rename the memory setting.
3.
Use ▲ ▼ ◄ ► to specify the location of the required
character to enter and press the
ENTER
button.
You can enter up to 16 characters.
OK
CANCEL
ALL DELETE
MEMORY NAME INPUT
Repeat step 3 until you finish the text line.
4.
Move the cursor to
ALL DELETE
and press the
ENTER
button to delete all the entered text line.
Press the
DEFAULT
button to delete the last entered
character or indicated with cursor in the text box.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press ▼ then perform step 3.
Select
5.
OK
and press the
ENTER
button to set the
entered text as a name.
NOTE:
If you have not saved any settings,
•
MEMORY 1 - 16
will not be displayed.
SIGNAL MODE
The current selected signal will be displayed. This
is available with signals from
COMPUTER IN
/
COMPONENT IN
/
HDMI IN
only.
NOTE:
See “List of compatible signals” in “Technical
•
Information” of the operating instructions.
