PICTURE menu
30 -
E
NGLISH
J
DETAIL CLARITY
You can adjust the detail clarity system levels.
Setting range: 0 to +7
J
CINEMA REALITY
You can switch the automatic image synchronizer
on/off for 24 frames a second images, such as
movies. Press ◄ ► to select the required setting.
ON:
Active
OFF:
Deactive
NOTE:
CINEMA REALITY
•
is effective only with interlace signals.
J
TV-SYSTEM
When the video signal is changed, the setting
switches automatically.
You can switch the setting manually to match
the video data. Press ◄ ► to cycle through the
options.
AUTO
NTSC
SECAM
NTSC 4.43
PAL-N
PAL-M
PAL
NOTE:
AUTO
•
setting will select from
NTSC/NTSC 4.43/PAL/
PAL60/PAL-M/PAL-N/SECAM
.
J
RGB/YP
B
P
R
The projector will detect the signal from the
COMPUTER
terminals if the signal is
RGB
or
YP
B
P
R
. You can turn off the automatic detecting
system and switch between
RGB
and
YP
B
P
R
manually.
AUTO:
Automatic detecting system
RGB:
Project as
RGB
signal
YP
B
P
R
:
Project as
YP
B
P
R
signal
NOTE:
Available with VGA60, 480i, 576i, 480p, 576p,
•
1 080/60i, 1 080/50i, 720/60p, 720/50p, 1 080/60p,
1 080/50p only.
When the input signal is not selected correctly with
•
AUTO
setting, select
RGB
or
YP
B
P
R
manually.
MEMORY SAVE
You can save and name the adjusted
PICTURE
menu
settings for instant access from
MEMORY LOAD
menu.
Adjust the items in
1.
PICTURE
menu.
Select
2.
MEMORY SAVE
and press the
ENTER
button.
Select the required memory setting and press the
3.
ENTER
button.
The confirmation screen will be displayed. Select
OK
and press the
ENTER
button.
Indicated with
is in use, and is empty.
Name the memory setting.
4.
Use ▲ ▼ ◄ ► to specify the location of the required
character to enter and press the
ENTER
button.
You can enter up to 16 characters.
OK
CANCEL
ALL DELETE
MEMORY NAME INPUT
Repeat step 4 until you finish the text line.
5.
Move the cursor to
ALL DELETE
and press the
ENTER
button to delete all the entered text line.
Press the
DEFAULT
button to delete the last entered
character or indicated with cursor in the text box.
To insert a character in the entered text line, move
the cursor to the text box to select the required place
and press ▼ then perform step 4.
Select
6.
OK
and press the
ENTER
button to set the
entered text as a name.
NOTE:
If you leave the text box empty and save, the default
•
memory number will stay as a name.
