background image

Important  Information

Important Safety Notice

E

NGLISH - 3

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct 
method of disposal.

WARNING:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit different from that to which the receiver 
is connected.

-

Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION:

To assure continued compliance, use only shielded interface cables when 
connecting to computers or peripheral devices. Any unauthorized 
changes or modifications to this equipment will void the users authority to 
operate.

 

If you use serial port to connect PC for external control of projector, you 
must use optional RS-232C serial interface cable with ferrite core. Any 
unauthorized changes or modifications to this equipment will void the 
user’s authority to operate.

Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Center
Panasonic Service Europe, a division of Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, F.R. Germany

WARNING:

Not for use in a computer room as defined in the Standard for the Protection 
of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.

Declaration of Conformity

Model Number:

PT-AE2000U

Trade Name:

Panasonic

Responsible party:

Panasonic Corporation of North America

Address:

One Panasonic Way, Secaucus, New Jersey 07094

Telephone number:

(888) 411 - 1996

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

Summary of Contents for PT-AE2000



























































Reviews: