B
asi
c Op
eration
Remote control operation
24 -
E
NGLISH
You can display the image brightness and
contrast level of the input signal with a
waveform. See “WAVEFORM MONITOR”
on page 32.
J
Displaying the waveform
1. Press the
WAVEFORM
button and display the
waveform monitor.
Press the
WAVEFORM
button again to escape from
the waveform mode.
2. Press
ENTER
button until the required waveform
option is displayed.
In
FULL SCAN
mode, press
F
G
I
H
to change
the waveform position.
In
SINGLE LINE SCAN
mode, press
F
G
to select
the required line position.
J
Adjustment example
Project a commercial test signal for picture
adjustment on the screen and press the
WAVEFORM
button.
Q
Adjusting with luminance options
1. Press the
ENTER
button until
FULL SCAN(Y)
/
SINGLE LINE SCAN(Y)
is displayed.
2. Press the
PIC. ADJUST
to display the
PICTURE
MODE
of the
PICTURE
menu.
3. Press
G
several times to display the
BRIGHTNESS
.
4. Adjust the
BRIGHTNESS
by pressing
I
H
.
Adjust the bottom line of the waveform to 0%
(0 or 7.5 IRE).
Setting range: -32 to +32
5. Press
G
once to display the
CONTRAST
.
6. Adjust the
CONTRAST
by pressing
I
H
.
Adjust the bottom line of the waveform to 100%
(100 IRE).
Setting range: -64 to +64
Adjusting the signal condition with a waveform
FULL SCAN
Monitoring the waveform of
brightness and contrast of the whole
image.
SINGLE LINE SCAN
Monitoring the waveform of
brightness and contrast in each
horizontal line of the image.
100%
50%
0%
100%
50%
0%
100%
50%
0%
ENTER
ENTER
Optimal
dynamic range
Adjust to 100%
Adjust to 0%
Monitor position
Optimal
dynamic range
Adjust to 100%
Adjust to 0%
Monitor position
COMPUTER
(except 1080)
HDMI
(Expand)
Sign
al level
Sign
al level
FULL SCAN(Y)
SINGLE LINE SCAN(B)
FULL SCAN(R)
SINGLE LINE SCAN(G)
FULL SCAN(G)
SINGLE LINE SCAN(R)
FULL SCAN(B)
SINGLE LINE SCAN(Y)
NOTE:
• In
SINGLE LINE SCAN
mode, the position of the
waveform monitor depends on the position of the
selected line.
• You can display the main menu by pressing the
MENU
button and adjust the menu items.
• The called up menu items displayed position depends
on the position of the waveform monitor.
• You can activate
AUTO ADJUST
of the
WAVEFORM
menu by pressing the
DEFAULT
button.
• The signal which is lower than 0% in the waveform will
be displayed as same as 0% on the projected image.
• While the waveform is displayed, the image is
displayed without the
COLOR MANAGEMENT
adjustment.
• When adjusting the
KEYSTONE
of the
POSITION
menu while the waveform is displayed,
xvYCC
will be
deactivated.
FULL SCAN(Y)/SINGLE LINE SCAN(Y)
BRIGHTNESS
Adjust the bottom line of the
waveform to 0% (0 IRE or 7.5 IRE)
CONTRAST
Adjust the top line of the waveform
to 100% (100 IRE)
