Panasonic PT-AE1000E Service Manual Download Page 26

Page: 26 / 82

7.4.3.2. G Reflector Adjustment

1. Turn on the power and display 100 % white pattern on the screen.

2. Loosen the 1 screw fixing the mirror adjusting lever A just until the lever can be shifted.

3. Adjust the mirror adjusting lever A position to minimize color unevenness on the screen by shifting the lever in arrow directions.

4. Tighten the 1 screw.

7.4.3.3. R Reflector Adjustment

1. Turn on the power and display 100 % white pattern on the screen.

2. Loosen the 1 screw fixing the mirror adjusting lever B just until the lever can be shifted.

3. Adjust the mirror adjusting lever B position to minimize color unevenness on the screen by shifting the lever in arrow directions.

4. Tighten the 1 screw.

7.4.3.4. B Reflector Adjustment

1. Turn on the power and display 100 % white pattern on the screen.

2. Loosen the 1 screw fixing the mirror adjusting lever C just until the lever can be shifted.

3. Adjust the mirror adjusting lever C position to minimize color unevenness on the screen by shifting the lever in arrow directions.

4. Tighten the 1 screw.

7.5. Software for Adjustment

7.5.1. Outline

This projector needs computer-aided adjustments.

After the software adjustments, this projector must be turned off and on again to memorize the settings.

Connect the cable between the projector and a PC as shown below.

Updating the software will change the version number.

PT-AE1000U / PT-AE1000E

Summary of Contents for PT-AE1000E



















































































Search results

Summary of Contents for PT-AE1000E

Reviews:

Related manuals for PT-AE1000E

Brands by name

Popular brands

Panasonic PT-AE1000E, Service Manual

Search results

Summary of Contents for PT-AE1000E

Reviews:

Related manuals for PT-AE1000E

Brands by name

Popular brands