manualshive.com logo in svg

Panasonic PT-52LCX66-K, Service Manual, Page: 98 / 223

Share
Download
Panasonic PT-52LCX66-K Service Manual Download Page 98

77

9A

81

70

70

70

200

200

200

Not used.
Refer to Software (2)
in "WHITE BALLANCE 
ADJUSTMENT"

Select it for each adjustment

Do not press

77

9A

81

70

70

70

200

200

200

Press

6. "Manu" indication will change to "Auto" indication, and

"Remote ON" indication will appear.
Confirm NUMLOCK is on. If not, turn on NUMLOCK by
pressing the NUMLOCK key on the 10-key keyboard.

7. Perform the necessary adjustment for the LCD Drive

P.C.B.

8. After completing adjustments, turn the remote off by

pressing DEL key. Then, close the software (1).

4) The following files will be created on "C:\Program

Files\Projector Checker." Software (1) installation is
complete.

3. Turn on the unit power.
4. To start up the software (1), select the "LCD Drive

Adjustment" on Program in Start menu.
The start-up menu will appear.

5. To turn the remote on, press DEL key.

PT-52LCX66-K / PT-56LCX16-K / PT-61LCX66-K

98

Summary of Contents for PT-52LCX66-K
































































































































































































































Reviews:

No comments