18
l
R
EMOTE
C
ONTROL
O
PERATION
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV, CABLE or DBS. Follow the procedures for programming your
Remote Control with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
Programming With A Code
Procedure
•
Confirm that the external component is plugged and operating.
•
Turn the component off.
•
Press
and
together, for at least 5 seconds.
•
Press appropriate component button on the Remote Control VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV,
CABLE or DBS.
•
Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).
•
Press the Remote Control
to test the component. If the procedure was successful, the component will
turn on.
Programming Without A Code
This procedure searches all codes and is called the “sequence method.”
•
Confirm that the external component is plugged in and turned on.
•
Turn the component off.
•
Press
and
together, for at least 5 seconds.
•
Press appropriate component button on the Remote Control.
•
Press
VOL
u
to move forward to the next code. Press
t
VOL
to move backward.
•
Press the Remote Control
to test the component. If the procedure was successful, the component will turn
on.
Note:
Repeat the above steps until the component code is found. It may take many attempts before the correct code
is found.
•
After the code is found, press
to store the code.
Default Modes For Remote Control
Device
Operates
Default
TV
TV (Panasonic Only)
Panasonic TV Codes
DTV
DTV (Panasonic Only)
Panasonic DTV Codes
CABLE
CABLE (Preset)
Panasonic CABLE Codes
DBS
DBS (Preset)
Panasonic DBS Codes
VCR
VCR (Preset)
Panasonic VCR Codes
DVD/CD
DVD and CD (Preset)
Panasonic DVD Codes
AUX
Personal Video Recorders,
Tape and VCR2
Panasonic Personal Video
Recorders Code
RCVR
Audio Receiver (Preset)
Panasonic RCVR Code
Helpful Hints: Unsuccessful Code
If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.
ACTION
POWER
POWER
ACTION
POWER
POWER
ACTION
