manualshive.com logo in svg

Panasonic PT-44LCX65-K, Service Manual, Page: 93 / 236

Share
Download
Panasonic PT-44LCX65-K Service Manual Download Page 93

How to transfer the gamma data using the
software (2):

1. Execute the "SCE2.EXE" file by double clicking. The

start-up menu will appear.

2. Select "(C)" on option pull-down menu, and confirm the

transmission setting as shown.

3. Select "(O)" on file pull-down menu.

4. Select "GAMMA_USUAL.sce" file, and press "Open."

Select

Select

Select

Press

GAMMA_USUAL.sce

Select 1st file

Select 2nd file

Select 3rd file

Select 4th file

Select 5th file

Select 6th file

red arrow

blue arrow

red arrow

blue arrow

red arrow

blue arrow

red arrow

blue arrow

red arrow

blue arrow

red arrow

blue arrow

5. Select desired gamma data of "MMD2003GAMMA"

folder (MMD2003GAMMA 1-5). Then, double click the
1st, 2nd, 3rd, 4th, 5th and 6th files in order.

When the file is double clicked, the transmission will
start. The red arrow will appear, and then the blue
arrow appear. First, a red arrow will appear, then a blue
arrow. The red and blue arrows will appear alternately.
Note:
If the blue arrow does not appear or the "Error"
indication appears, transmission has failed. In this case,
double click the file again until the blue arrow appears.

PT-44LCX65-K / PT-52LCX65-K / PT-61LCX65-K

93

Summary of Contents for PT-44LCX65-K













































































































































































































































Reviews:

No comments