33
English
Panasonic display link function
Just connect the receiver to a Panasonic display supporting this product using HDMI cable and turn
them on to perform the link operation. (It is necessary to set [Wireless presentation link] to [On].)
Set link function details in the following setting menus.
■
Check
Sets external device link.
[Check]- submenu screen
Check
Please check the display to register.
Off
Wireless presentation link
On
●
[Please check the display to register.]
Sets whether to display or hide the information of the device connected to the HDMI terminal.
[Off]:
Connected device information is not displayed.
[On]:
Connected device information is displayed as shown below.
HDMI1
16:9
Player1
Note
•The obtained information of either signal or HDMICEC is displayed.
•Up to the first 16 characters obtained are displayed.
●
Wireless presentation link
Sets the link of the Display with this product.
[Off]:
Does not link with this product.
[On]:
Links with this product.
Note
•When this product. is connected to the HDMI terminal, the link function works.
•The following functions are fixed.
These settings are held even if this function is switched from [On] to [Off]. The settings can be changed on each
setting menu.
•[Picture mode] is fixed to [Graphic].
•[HDMI-CEC control] is fixed to [Enable]. [Display → Device] is fixed to [Power off / on]. [Device → Display] is
fixed to [Power off / on].
•Even if this function is set to [Off], the HDMI-CEC function works.
