46
Error Display Messages
Disc Player
Display
Possible cause
a
Possible solution
The disc is dirty, or is upside down.
a
Check the disc.
The disc has scratches.
a
Check the disc.
No operation by some cause.
a
Unplug the power cord and plug it again.
In
case the unit is still out of order, consult your
dealership.
The player for some reason cannot read the file
you are trying to play. (File recorded in an unsup-
ported file system, compression scheme, data
format, file name extension, damaged data, etc.)
a
Select a file that the player can read. Check
the type of data recorded on the disc. Create
a new disc if necessary.
A WMA file can be copyrighted.
a
The file protected by copyright is not play-
able.
No disc in the player.
a
Insert disc into the disc slot.
USB (MP3/WMA)
A USB device is not connected or the connected
device cannot be recognized.
a
Use a USB memory that is suitable for this
unit.
No playable files exist.
An unsupported USB device is connected.
a
Use a USB memory that is suitable for this
unit.
a
Record files that can be played back on this
unit onto the USB memory.
A USB device that exceeds the current capac-
ity that can be supplied is connected. For some
reason, an over-current was detected.
a
Use a USB memory that has a consumption
current of less than 1 A.
a
Switch the Source, and select the USB (MP3/
WMA) mode again.
a
Switch the power off/on, and select the USB
(MP3/WMA) mode again.
a
Check that the USB connector section is not dirty,
and that there is no foreign objects.
Summary of Contents for PP105160
Page 55: ...55 Memorandum ...