36
SiriusXM Satellite Radio Control (continued)
System control mode selection
Function settings
SiriusXM radio display
Hold down
[SEL]
for more than 2 seconds to open SXM function setting
screen.
Turn
[VOL]
to open alarm time setting screen.
Turn
[VOL]
back to SXM function setting screen.
SiriusXM function setting mode
Note
: See below “Function settings” for its
inside setting.
Alarm time setting mode
Note
: Refer page 38 and follow its steps from
2
to
6
to set alarm time if needed.
Channel direct selection mode
A channel is directly selected with the channel
number entry.
1
Hold down
[SEL]
for more than 2
seconds to open SXM function setting
screen.
2
The radio automatically enters the
SXM direct channel selection mode af-
ter 2 seconds when entering the SXM
function setting screen.
Channel direct selection mode
3
Press
[
d
]
or
[
s
]
to select a number.
4
Press
[BAND]
to enter the next digit.
5
If necessary, repeat steps
3
and
4
to
enter more digits of the channel num-
ber.
6
Push
[SEL]
when done entering the
channel number digits and the radio
tunes to the desired channel.
Notes
:
¡
”CHAN
***
UNAVAIL” is displayed when the re-
quested channel is not valid. Visit www.siriusxm.
com to see the list of channels available.
¡
”CHAN
***
UNSUB” is displayed when the
requested channel is not part of the current
subscription package. Visit www.siriusxm.com for
information on subscription packages.
Signal strength indicator
[DISP]
(Display)
switches the information on the display.
[
d
] [
s
]
selects a number.
[VOL]
opens the function setting.
(PUSH SEL
:Select
)
opens or exits the function setting.
determines the selection.
[BAND]
shifts to the next digit.
selects the code entry mode.
exits code entry mode.
changes a channel to be locked
or unlocked.
Summary of Contents for PP105160
Page 55: ...55 Memorandum ...
