28
Bluetooth
®
- General
DISP
DISP
DISP
DISP
(Bluetooth
®
) indicator
lights when a Bluetooth
®
device is connected, and blinks during a call.
Registration
number
(M1 – M8)
Registration of a Bluetooth
®
device
to this unit
1
Press one of the preset buttons from
[1]
through
[6]
to select a registration
number assigned to the Bluetooth
®
device to be registered.
Note
: Up to 8 devices memory registered with
preset buttons.
[1]
–
[5]
: Selects a registration number
(1st page: 1 – 5, 2nd page: 6 – 8)
[6]
: Turns the registration pages
For registration No.6: press
[6]
, then press
[1]
.
For registration No.7: press
[6]
, then press
[2]
.
For registration No.8: press
[6]
, then press
[3]
.
2
Hold down the selected preset button
for more than 2 seconds.
3
Push
[SEL]
(Select) to make this unit
standby for registration with waiting
status.
Note
: To exit waiting status, press
[DISP]
.
4
Operate your Bluetooth
®
device to input
the PIN code for connection. (Default
PIN code is “0000”)
Once pairing/registration is successful, the
registered Bluetooth
®
device can automatically
communicate with this unit.
Notes
:
¡
The text display of Bluetooth
®
device name and
telephone directory on this unit is only sup-
ported with English characters, other languages
and undisplayable characters/symbols will be
converted into an asterisk (
*
).
¡
If registration is not successfully completed within
1 minute, “TIME OUT” appears and the screen for
registration number selection resumes.
¡
If registration fails because of mismatched PIN
code, “B/T PIN ERR” appears and the screen for
registration number selection resumes.
¡
Depending on the communication status, it may
takes 5 to 40 seconds for device connection.
Note on operation:
Some Bluetooth
®
devices/Phones may not connect
to this unit or, even when connected, the operation
method, displays, and functions may differ from the
instructions within this manual.
For the Bluetooth
®
devices/Phones to be supported
with this unit, please visit/consult your dealer to
verify compatibility of your Bluetooth
®
devices or
phones.
Display change
Press
[DISP]
(Display) to change the
display.
Registered device
name (Example)
Clock
[DISP]
(Display)
switches the
information on the
display.
[SRC]
selects a source.
[BAND]
connect, or discon-
nect a Bluetooth
®
device.
[PUSH SEL]
deletes the registration data.
makes this unit standby for
registration.
[1]
through
[6]
(preset buttons)
selects a registration number of a
Bluetooth
®
device.
[6]:
sets the PIN code.
[
s
]
/
[
d
]
selects a number.
(Signal) indicator
lights when a cellular phone is paired and connected,
indicates the intensity of cellular phone’s signal wave.
[
)
one is paired and connected,
cellular phone’s signal wave.
