22
The power fails
unintentionally.
The safety device works.
a
Consult your nearest Servicenter.
Clock time is reset.
Battery cable is not correctly connected.
a
Connect the battery cable to the terminal that is always active.
Poor reception or noise
Antenna installation or wiring of antenna cable is faulty.
a
Check whether the antenna mounting position and its wiring are
correct. In addition, check to see whether the antenna ground is
securely connected to the chassis.
No power is supplied to the antenna amplifier (when using a film
antenna, etc.).
a
Check the wiring of the antenna battery lead.
Radio
The number of auto preset
stations is less than 6.
The number of receivable stations is less than 6.
a
Move to an area where receivable stations number is maxi-
mum, and try presetting.
No playback or disc ejected
The disc is inserted upside down.
a
Insert a disc correctly.
There is a flaw or foreign material on the disc.
a
Remove the foreign material, or use a flawless disc.
Sound skipping or noise
There is a flaw or foreign material on the disc.
a
Remove the foreign material, or use a flawless disc.
Sound skipping due to
vibration
The unit is not sufficiently secured.
a
Secure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
a
Make the angle 30˚ or less.
Disc unejectable
Something such as a peeled label obstructs the disc coming out.
a
Consult your nearest Servicenter.
The microcontroller in the unit operates abnormally due to noise or
other factors.
a
Unplug the power cord and plug it again.
In case the unit is still
out of order, consult your nearest Servicenter.
CD
The CD-R/RWs that are
playable on other devices are
not playable on this unit.
The playability of some CD-Rs/RWs may depend on the combination
of media, recording software and recorder to be used even if these
CD-Rs/RWs are playable on other devices such as a PC.
a
Make CD-R/RWs in different combination of media, recording
software and recorder after referring to the description about
the compressed audio player.
Sound skipping or noise
There is a flaw or foreign material on the disc.
a
Remove the foreign material, or use a flawless disc.
Playing VBR (Variable Bit Rate) files may cause sound skipping.
a
Play Non-VBR files.
No playback or disc ejected
The disc has unplayable formatted data.
a
Check the file format.
Note
: Refer to “Notes on MP3/WMA”. (
a
Page 28)
MP3/WMA
Troubleshooting (continued)
CQ̲5256Uv 10/12/15 13:25
ページ
22
