111
4.6.11. NDP Table
On the Basic Switch Configuration Menu, pressing "D" opens the NDP Table
screen, as shown in Fig. 4-6-40. In this screen, you can refer and configure
NDP table.
Fig. 4-6-40 NDP Table
Screen Description
Sorting Method
Shows the order of displaying.
By IP
Shows the table in the order of IPv6 address.
By MAC
Shows the table in the order of MAC address.
By Static
Shows manually-set addresses.
By Dynamic Shows auto-learned addresses.
Type
Shows the type on ARP table.
Static
The address is manually set.
Dynamic
The address is auto-learned.
NDP Reachable Time
Shows the NDP Reachable time.
NDP State Time
Shows the NDP Stale time.
IPv6 Address
Shows the IPv6 Address on NDP table.
Hardware Address
Shows the hardware address on NDP table.
Status
Shows the IPv6 neighbor cache.
Type
Shows the type on NDP table.
Static
The address is manually set.
Dynamic
The address is auto-learned.
PN28160K Local Management System
Basic Switch Configuration -> NDP Table
Sorting Method: By IP
NDP Reachable Time: 30 Seconds NDP Stale Time: 600 Seconds
IPv6 Address Hardware Address Status Type
--------------------------------------- ----------------- ---------- -------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [A]dd/Modify Static Entry
[P]revious Page [D]elete Entry
Set NDP [R]eachable Time [S]orting Entry Method
Set NDP Stale [T]ime [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
