105
4.6.8.c. Displaying All MAC Addresses
On the Forwarding Database Information Menu, pressing "M" opens the
Display MAC Address by MAC screen, as shown in Fig. 4-6-36. In this screen,
you can display all MAC address tables in this Switching Hub.
Fig. 4-6-36 Displaying All MAC Addresses
Screen Description
Age-Out Time: Shows a time to store MAC address table. It is equal to the time after
receiving the last packet. The factory default setting is 300 seconds (5
minutes).
MAC Address
Shows the MAC address in MAC address table.
Port
Shows the port to which the MAC address has belonged.
Available commands are listed below.
N Show the next page.
Press "N." The screen shows the next port.
P Show the previous page.
Press "P." The screen shows the previous port.
A Set a time to store MAC address.
Press "A." The command prompt changes to "Enter Age-Out time>." Enter Age-Out
time with a value of 10 to 1000000 (seconds).
Q Return to the previous menu.
PN28160K Local Management System
Forwarding Database Menu -> Display MAC Address by MAC
Age-Out Time: 300 Sec.
MAC Address Port
----------------- ----
xx:xx:xx:xx:xx:xx CPU
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set [A]ge-Out Time
[P]revious Page [Q]uit to previous menu
Command>
Enter the character in square brackets to select option
