Panasonic PN28080i, Operation Manual

Page: 78 / 442

78
<Configuration Example>
Overview: Enable the SNMP function, then set the community name
and the address information.
(1) Enable the SNMP agent.
(2) Set the SNMP manager administrative information as below.
community 1, private, Read-Write, 192.168.1.200
(3) Set the SNMP manager administrative information as below.
community 2, public, Read-Only, 192.168.1.200
(4) Set the SNMP trap receiver settings as below.
trap receiver 1, SNMP v1, 192.168.1.200, community public
Fig. 3-3-2 Example of executing the command to show the SNMP information
M24eGi> enable
M24eGi# configure
M24eGi(config)# snmp-server agent
M24eGi(config)# snmp-server community 1 private rw 192.168.1.200
M24eGi(config)# snmp-server community 2 public ro 192.168.1.200
M24eGi(config)# snmp-server host 1 type v1 192.168.1.200 trap public
M24eGi(config)# end
M24eGi#
(1)
(2)
(3)
(4)