Panasonic PN28080i, Operation Manual

Page: 285 / 442

285
<Setting display example>
The following is an execution example of the IEEE802.1X port-based
authentication configuration display command.
Fig. 4-11-1 Execution example of the IEEE802.1X port-based authentication
configuration display command
NAS ID Displays authentication ID (NAS Identifier).
Port No Displays a port number.
Authorized MAC
Address Displays the MAC address for the authorized host.
Port Status Displays the authentication status. The following
Port Control configuration is reflected.
Unauthorize
d
Authentication is not authorized.
Authorized Authentication is authorized.
Port Control Displays the operation mode for authentication
requests.
Auto
The access control function is
enabled. The authentication process
relay is performed between the
client and authentication server.
Force
Unauthorize
d The access control function is
disabled. All authentication requests
from the client are ignored.
Force
Authorized The access control function is
disabled. Communication of the
port is possible without
authorization. (factory default
setting)
Transmission Period The number of seconds to wait before requesting
M24eGi> enable
M24eGi# show dot1x port-based 1
NAS ID: Nas1
Port No: 1 Authorized MAC Address: --:--:--:--:--:--
Port Status : Authorized OperControlDirection : Both
Port Control : Force Authorized AdminControlDirection: Both
Quiet Period : 60 seconds Transmission Period : 30 seconds
Supplicant Timeout: 30 seconds Server Timeout : 30 seconds
Maximum Request : 2 Re-auth Period : 3600 seconds
Per Port Re-auth : Disabled Current PVID : 1
Guest VLAN ID : ---- Default VLAN ID : ----
Re-Auth Timer Mode: RADIUS
M24eGi#