3.4 Configuration of IP address (Basic)
(1) Connect this Ethernet Switch and PC with a RJ45–DSub 9-pin console cable and
start up the terminal emulator (ZEQUO assist Plus, etc.).
(2) Pressing Enter key 1 time opens Login screen. Enter UserName and Password
(the default is "manager" for both).
(Screen 1)
(3)
The command input screen
is displayed.
(Screen 2)
(4) Enter the IP address and subnet mask using the following command.
(Screen 3)
>enable
#configure
(config)#interface vlan1
(config-if)#ip address 192.168.1.254 255.255.255.0
(5) Enter the following command to save the setting.
Since the following screen is
displayed, enter “Y” and the settings will be saved.
(Screen 4)
(config-if)#exit
(config)#exit
#copy running-config startup-config
(6) From terminals connected to network, confirm that the settings are reflected
correctly by executing PING test for entered address.
1
n
e
e
r
c
S
15
