22
WIRING DIAGRAMS
•
PM4H-F8 (no reset input)
Pin type
Time-delay 2C
PM4H-F (WITH RESET) INPUT CONDITIONS
TIME RANGE
1. Contact operating input (pin type example)
2. Non-contact input (pin type example)
•
PM4H-F8R (with reset input)
Pin type
Time-delay 1C, with reset input
•
PM4H-F11R (with reset input)
Pin type
Time-delay 2C, with reset input
Screw terminal type
Time-delay 2C, with reset input
Operating
voltage
(–)
(+)
COM
COM
N.C.
N.C.
N.O.
N.O.
Operating
voltage
(–)
(+)
COM
N.C.
N.O.
Reset input
Operating
voltage
(–)
(+)
COM
N.C.
N.O.
COM
N.C.
N.O.
Reset input
COM
COM
(+)
(–)
N.O.
N.C.
N.C.
N.O.
Operating
voltage
Reset input
Reset input
Reset input
Reset input
Reset input
Photo-coupler
Photo-coupler
PM4H-F8R
PM4H-F11R
PM4H-F8R
PM4H-F11R
Use a contact with good contact relia-
bility for the input. Contact bounce can
lead to erroneous operation of the
timer, so use a contact with short
bounce time. Make the resistance
between terminals for a short circuit
less than 1k-ohms. Make the resis-
tance between terminals for an open
circuit greater than 100k-ohms.
Be sure to use a photo-
coupler for non-contact
input.
Check that Vce = 0.6V
Max. when ON.
Time range
Time range
unit
1
5
10
0.04s to 1s
0.2s to 5s
0.4s to 10s
0.04 min to 1 min
0.2 min to 5 min
0.4 min to 10 min
s range type
min range type
PM4H-F
02/2003
