44
Setting
Capture
This function enables you to capture the image
being projected and use it for a start-up display or
interval of presentations.
After capturing the projected image, go to the
Logo select function and set it to "User". Then the
captured image is displayed when turning on the
projector next time or pressing the NO SHOW
button. (p.24)
To capture the image, select [Yes]. To cancel the
Capture function, select [No].
✔
Note:
• Before
capturing
an
image,
select
Standard in
the
Image
Select
Menu
to
capture
a
proper
image.
(p.30,
38.)
• A
signal
from a
computer
can
be
captured
up
to
XGA
(1024x768).
A
signal
from
video
equipment
can
be
captured
except
for
720p,
1035i,
and
1080i.
• When
capturing
the
image
that
has
been
adjusted
by
the
Keystone
function,
the
adjustment
data
is
automatically
reset
and
the
projector
captures
an
image
without
keystone
adjustment.
• When
the
Logo
PIN
code
lock
function
is
"On",
Capture
menu
cannot
be
selected.
• When
starting
to
capture
a
new
image,
the
previously
stored
image
is
cleared
even
if
you
cancel
the
capturing.
Select [Yes] to capture the
projected image.
Select [Yes] to stop
capturing.
Capture
This function prevents an unauthorized person from
changing the screen logo.
Off . . . . . . the screen logo can be changed
freely from the Logo select menu.
(p.43)
On . . . . . . the screen logo cannot be changed
without the Logo PIN code.
If you want to change the Logo PIN code lock
setting, enter a Logo PIN code along the following
steps. The initial Logo PIN code is set "4321" at the
factory.
Logo PIN code lock
Logo PIN code lock
Setting