Customizing Your Machine
37
Fax Parameter Table
P
rogr
am
m
in
g
Y
our
M
ac
h
in
e
18
OP CALL TIMER
1
20 sec.
Selecting the length of time that your machine signals
(rings) for an incoming voice call in Fax/Tel Auto Switching
mode. (See page 64)
2
30 sec.
3
40 sec.
4
50 sec.
19
OGM LENGTH
(TAM I/F)
1
1 sec.
Setting for the OGM length of your TAM from 1 to 60
seconds. The machine will not start to detect SILENCE
until the time setting has lapsed.
(Default = 20 sec.)
---
---
60
60 sec.
20
SILENT DETECTION
(TAM I/F)
1
Invalid
Selecting the Silent Detection Mode.
2
Valid
22
SUBSTITUTE RCV
1
Invalid
Selecting whether the machine receives to memory when
recording paper runs out, toner runs out or recording paper
is jammed.
2
Valid
23
REC. PAPER SIZE
1
A4
Setting the recording paper size installed in your machine.
2
Letter
3
Legal
24
PRINT REDUCTION
1
Fixed
Selecting print reduction mode.
Fixed
:Reduce received document according to setting of
Parameter No. 25.
Auto
: Reduce received document according to the length
of received documents.
2
Auto
25
REDUCTION RATIO
70
70%
Selecting fixed print reduction ratio from 70% to 100%.
This parameter functions only when fixed print reduction is
selected on Fax Parameter No. 24.
----
----
100
100%
26
POLLING PASSWORD
(----)
Setting a 4-digit password for secured polling.
27
POLLED FILE SAVE
1
Invalid
Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
2
Valid
28
STAMP AT MEM. XMT
1
Invalid
Selecting whether the machine stamps the original
documents when storing the documents into memory.
(Depending on the Stamp setting on the Control Panel)
2
Valid
30
DRD SERVICE
1
Invalid
Selecting whether or not the machine is available "DRD
Service". If this parameter is set to "Valid", your machine
detects the specified ring pattern only to receive a
document automatically.
2
Valid
31
INC. FILE SAVE
1
Invalid
Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
2
Valid
32
COPY REDUCTION
1
Manual
Selecting whether the machine performs the copy
reduction ratio automatically or manually.
Manual
: The machine will prompt you for the Zoom ratio
(100% to 70%) when making copies.
Auto
: The machine will automatically determine the
reduction ratio according to the length of the
original document.
2
Auto
No.
Parameter
Setting
Number
Setting
Comments
Continued on the next page...
