Installing the Thermal Transfer Film
10
Install the thermal transfer film in the printer.
1
Set the power switch to on (
I
).
• “
” will flash on the Multi-Copy/Error
Indicator when the thermal transfer film has
run out.
• The screen will move to home position and
stop.
2
Push down the printer open lever and open
the printer door.
3
Install the thermal transfer film.
1) Set the thermal transfer film, with the blue
gear in front, on the right.
2) Insert the blue shaft into the front left hole.
3) Place the blue gear on the front right groove.
4) Place the white shaft on both sides of the back
grooves.
Installing the Thermal
Transfer Film
ON
OFF
Printer door
Blue gear
Blue shaft
Blue gear
White shaft
UB-7325_MECA.book 10 ページ ２００８年１月７日 月曜日 午後４時１６分
