![background image](http://html1.mh-extra.com/html/panasonic/pan9420/pan9420_quick-start-manual_3708764019.webp)
PAN9420 Quick Start Guide
Quick Start Guide Rev. 1.0
Page 19
To start the program, read the general Terms and Conditions, then click on the
Accept and
Start
button. In order to read out the modules firmware, MAC address, serial number, radio
version, bootloader version and hardware revision, perform the following steps:
1. On the top, choose the corresponding COM port. It is the same as used in
– Connecting through USB0 and a Terminal Program
2. Click the
Connect
button.
Figure 12: WIFIgurator connection
3. Lastly click on the
Read Out
button.
4. You should see a response in the
Communication
part of the GUI:
Figure 13: WIFIgurator Reading Info