PAN4620
4 Getting Started
Quick Start Guide Rev. 0.1
Page 21
Use the Thread Application
Flash at least two of the PAN4620 Evaluation Boards with this software.
Open two terminal programs like
HTerm
and connect to the COM ports of both nodes.
1.
Use the serial configurations for the nodes (like the figures below will show).
2. On the first node enter the command
thr create
and press
[ Enter
]
.
Wait till the node has created the Thread network (here with the
ID 0xc26d
).
3. On the second node enter the command
thr join
and press
[ Enter
]
.
