PAN4620
4 Getting Started
Quick Start Guide Rev. 0.1
Page 20
MCUXpresso IDE
after loading the example demo from SDK.
Flash the software
Connect the PAN4620 Evaluation Board to the PC.
1.
2. Click the Debug icon
.
The software will be flashed with the onboard
J-Link-OB-SAM3U128
to the
PAN4620 module.
3. Click the Start icon
in the toolbar, to run the application on the PAN4620
Evaluation Board.
In case of more than one connected PAN4620 boards, the IDE will give the
possibility, to choose which should be flashed. Compare the
Segger Serial
number/ID
(1) with the label on the bottom of the PAN4620 board. Click
OK
(2).
