PAN4620 802.15.4 and Bluetooth LE Module
5 Getting Started
Integration Guide Rev. 1.0
Page 31
Starting the Test Tool 12
1. Connect the PAN4620 ETU device to the PC.
After windows driver installation the device with COM port will show up in window
Command
Console
(1).
2. Click on the tab
Firmware
Loader
(2).
3. Select the preferred J-Link device in the list (1).
The label on the bottom of the PAN4620 ETU device will give the Segger J-Link ID of the
board, which can be found in the mentioned list.
4. Click
browse
(2).