PAN1780 Bluetooth Module
Module Integration Guide Rev. 1.1
Page 2 of 44
Overview
The PAN1780 is a Bluetooth 5 Low Energy (LE)
module based on the Nordic nRF52840 single chip
controller.
Features
•
Surface mount type dimensions:
15.6 mm x 8.7 mm x 2 mm
•
Same form factor as PAN1026A and PAN1762
but smaller pitch and more pins
•
Nordic nRF52840 featuring ARM
®
Cortex
®
-M4F
with 64 MHz
•
Bluetooth 5 LE including LE 2M and LE Coded
PHY
•
Embedded 1 MB flash memory and 256 kB
internal RAM
•
Includes ARM TrustZone
®
CryptoCell
®
310 and
supports secure boot including Root of
Trust (RoT)
•
Up to 48 General Purpose I/Os (GPIO), which
are shared by up to 4 SPI, 2 I²C, 2 UART,
4 PWM, 8 ADC, 1 NFC-A, 32 kHz IN/OUT,
nRESET
•
USB 2.0 full-speed device interface
•
Built in temperature sensor
Bluetooth
•
LE 2 Mbps high speed PHY, LE long range
coded PHY
•
LE advertising extensions (advertising on 40
channels total)
•
Channel selection algorithm #2
•
LE secure connections
•
Over-the-air update of application software
•
Qualified Bluetooth mesh profile stack
Characteristics
•
Typical sensitivity: -
95 dBm at 1 Mb/s
and -
103 dBm at 125 kb/s
•
Typical max. output power: 8 dBm, configurable
from -
20 dBm in 4 dB steps
and -
40 dBm in
whisper mode
•
Typical curre
nt consumption: 4.8 mA in Tx
(at
0 dBm) and 4.8 mA in Rx mode
•
Typical current consumption: 0.4 µA in System
OFF mode, 1.5 µA with RTC wake up
•
On-module DC/DC and LDO regulators with
automated low current modes
•
Voltage range: 1.7 V to 5.5 V
•
Temperature range: -
40 °C to 85 °C
Block Diagram