Panasonic PalmTheater DVD-LV60, Service Manual

Page: 38 / 125

(Way of CANCEL)
Power supply OFF, ( It pulls out DC power supply).
Once again, make a power supply “ON” condition.
By pushing the "STOP" button, it makes a stop condition.
Push the "CANCEL" button of remote control.
( If not making a stop condition, there is not an effect.)
10.5.1. Adjusting the VCO oscillating frequency
Standard for carrying
out the adjustment
Check point
Synchronization on the
LCD screen is
disordered by replacing
the circuit parts relating
to VCO
TP8201
Adjustment procedure Adjusting
to higher
value
Adjusting
to lower
value
Press "1" on the main
body / remote control
Press
on the main
unit /
remote
control
Press
on the main
unit /
remote
control
Actual adjustment Input video signal
Change the video input
to outer one. Input no
signal into the input
terminal. (Set the VCO to
free run.) f = 15.680 kHz ±
0.1 kHz
-------------------
10.5.2. Adjusting offset voltage for LCD Bias
38