for
dium).
1
2
3
4
5
7-B Before Requesting Help
Problem
You press
(POWER)
to
power the unit ON, but
the unit does not work.
Your message cannot
be transmitted.
The other party’s
message cannot be
received.
You cannot change
channel/code settings.
Remedy
≥
Reposition or replace batteries (1-C).
≥
Make sure the unit is unlocked (5-A).
≥
Make sure
(TALK)
is firmly pressed
and held when you transmit.
≥
Reposition or replace batteries (1-C).
≥
You cannot send a message while
receiving using the Headset Mic
(KX-TRA10C). Wait until the other
party stops talking.
≥
Change the VOX sensitivity according
to the noise around you in the VOX
mode (6-A).
≥
Make sure the other party’s channel/
code settings are the same as yours.
≥
Make sure
(TALK)
is not inadvertently
being pressed.
≥
Reposition or replace batteries (1-C).
≥
Obstructions, operating indoors or in
vehicles, may interfere with
communication. Change your location
and try again.
≥
Hold the unit near your ear to hear the
message from the ear speaker when
the flip is open.
≥
Change the VOX sensitivity according
to the noise around you in the VOX
mode (6-A).
≥
Make sure the unit is unlocked (5-A).
7
Things You Should Know
¤
Things You Sho
7-C Specifications
7-D Important and Other Information
NOTICE:
Operation is subject to the condition that this device may not cause
harmful interference.
Privacy of communications may not be ensured when using this unit.
≥
Environment—do not leave the unit in a place where the
temperature is less than –10°C (14°F) or greater than 50°C
(122°F), such as in areas of direct sunlight, heating radiators or
closed automobiles. Avoid excessive smoke, dust, mechanical
vibration or shock. Keep the unit away from magnetic cards, such
as bank cards, telephone cards, etc., as the magnet in the unit
may cause the data on the card’s magnetic strip to be erased.
≥
For safe motor vehicle operation—please do not use the unit
while driving. Either stop your vehicle or allow a passenger to use
the unit.
≥
Medical—consult the manufacturer of any personal medical
devices, such as pacemakers, to determine if they are adequately
shielded from external RF (radio frequency) energy. (The unit
operates in the frequency range of 462.5625 to 462.7125 MHz and
467.5625 to 467.7125 MHz, and the power output level is up to
0.5 watts.) Do not use the unit in health care facilities if any
regulations posted in the area instruct you not to do so. Hospitals
or health care facilities may be using equipment that could be
sensitive to external RF (radio frequency) energy.
≥
Routine care—wipe the unit with a soft cloth. Do not use benzine,
thinner, or any abrasive powder.
≥
If there is any trouble—consult an authorized Panasonic Factory
Servicentre.
n 6
r
er
ack is
Using
nit.
e
Operating frequency
462.5625–462.7125 MHz
467.5625–467.7125 MHz
14 channels
38 codes
Power requirements
4.5 V DC,
3 AA (LR6) size alkaline batteries
(not included)
External power source
DC IN 4.5 V jack accepts:
12 V negative ground car battery with Car
DC Power Adaptor (optional)
Alkaline battery life
Approx. 30 hours (Based on a usage duty
of 5% receive, 5% talk, 90% standby)
Design and specifications are subject to change without notice.
462.5625
462.5875
462.6125
462.6375
462.6625
Ch
Freq.
Ch
Freq.
Ch
Freq.
462.6875
462.7125
467.5625
467.5875
467.6125
6
7
8
9
10
467.6375
467.6625
467.6875
467.7125
11
12
13
14
(unit: MHz)
Channel frequency chart
cket
Problem
Other conversations or
noise on a channel is
heard when receiving.
Limited Talk Range
Static, sound cuts
in/out, fades.
Interference emits
when transmitting.
The transmission
suddenly stops while
sending messages
using
(TALK)
.
“
” flashes on the
display.
The display is dim.
Remedy
≥
Confirm the group code setting (2-B).
If the setting is “0” (OFF), reprogram
the same group code as the other
party, and try again.
≥
Shared channel or group code may be
in use. Try another.
≥
Steel/concrete structures, heavy
foliage and use in buildings or vehicles
will decrease range. Check for clear
line of sight to improve transmission.
≥
Wearing the unit on your body, such
as in a pocket or on a belt, will
decrease range. Change location of
the unit.
≥
You are too close to the other party.
You should be at least 10 feet apart.
Increase your distance.
≥
You are too far from the other party.
Obstacles interfere with transmission.
Range is maximized in flat, open
areas.
≥
The unit automatically returns to the
standby mode if more than
60 seconds pass while sending
messages using
(TALK)
. To continue,
press and hold
(TALK)
again.
≥
Reposition or replace batteries (1-C).
≥
Reposition or replace batteries (1-C).
n 7
and
s
PQQX12651XA-BM 00.7.27 9:56 AM ページ 13